EVAL-ADAU1467Z Documentation mismatch. Documentation available Rev.A, Product received Rev.B

Question

I bought the Evaluation Board. Unfortunately the documentation on the site is of version A, while the Evaluation Board received is in revision B. 
 As shown in the attached image, on the left I took the image taken from the documentation (RevA), where I highlighted the revision of the PCB in red, while in yellow I highlighted the configuration switches area. 
 In the image on the right instead there is the photo of the product received. The revision is different, and the configuration switch has disappeared, so the configuration will be done in some other way, but it is not explained anywhere, because the documentation being of version A explain the setting by those switches that no longer exist.

Ken.M · Accepted Answer

George, 
 Attached is a draft of the User Guide for Rev B. There are plans to expand the section on programming the CODEC, but the schematics and figures are all updated. 
 PDF 
 Ken

Ken.M · Answer

Many apologies for your troubles. The revised User Guide is still being edited. In the meantime, I've uploaded the schematics and the artwork for this board. The silkscreen should be self explanatory for many of the headers. I've also attached a "starter" project for this board that configures all of the necessary registers for the CODEC. 
 Best regards, 
 Ken 
 EVAL-ADAU1467Z Rev. B Schematics 
 EVAL-ADAU1467Z Rev. B PCB Artwork 
 EVAL-ADAU1467Z Rev. B - Starter Project with CODECs Configured

Electronic Design Services - PartnerZone

EVAL-ADAU1467Z Documentation mismatch. Documentation available Rev.A, Product received Rev.B

Top Replies