• State Not Answered
  • Replies 1 reply
  • Subscribers 37 subscribers
  • Views 350 views
  • Users 0 members are here
Options
Similar Content 

        

            Post
             Go back to editing
        

    

    


    

    









		












	
	
			
	
			
		
	
	
		

		
UART and SPORT



		

			

									
					    Ayan
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Sep 9, 2022 
				
			
			
		
    

				
		
    
		    		    
		    
		    		            		        
    Category: Datasheet/Specs
    
    		        		            		    
    Product Number:  ADSP21369  
    
    		        		    		    	
			
    Hi
    

      

    • Digital applications interface that includes four precision
      clock generators (PCG), a input data port (IDP) for serial
      and parallel interconnect, an S/PDIF receiver/transmitter,
      four asynchronous sample rate converters, eight serial
      ports, a flexible signal routing unit (DAI SRU).
      • 

    • Digital peripheral interface that includes three timers, a 2-
      wire interface, two UARTs, two serial peripheral interfaces
      (SPI), 2 precision clock generators (PCG) and a flexible signal
      routing unit (DPI SRU).
      • 

    

    This above bulleted point are extracted form ADSP21369 datasheet. by looking on to the pin details of ADSP21369 208Pins, I am not able to find 8 Sport,,4PCG,8Ch sample rate converter and input data port . Like a same way i am unbale to find  2UARTS, 3Timers, 12 flags ,instead i could find only 1UART, timer1 and 0.
    

    

    Could some me help me to understand .
    

    

    Regards
    

    Ayan
    
										

    
				Updated with new Ask A Question form
    
[edited by: GenevaCooper at 1:19 PM (GMT -4) on 9 Sep 2022]
				
    
					
    

				
				
		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    


	
    
		
	
    















    
	
    
	
    
					



			








	
	
	
	



Parents
	
      
	

    • 
	
      



	
		
	
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
			                            
                        
                on Sep 12, 2022 7:18 PM
            
            
					
      
	
      

		
		
      
					
      Hi,

      The digital application interface (DAI) and the digital peripheral interface (DPI) are comprised of a groups of peripherals and their respective signal routing units (SRU and SRU2). The inputs and outputs of the peripherals are not directly connected to external pins. Rather, the SRUs connect the peripherals to a set of pins and to each other, based on a set of configuration registers. This allows the peripherals to be interconnected to suit a wide variety of systems.

      The DAI SRU provides the connection from the serial ports (8), the SRC module, the S/PDIF module, input data ports (2), and the precision clock generators (4), to the DAI_P20–1 pins.

      The DPI SRU provides the connection from the timers (3), SPIs (2), UARTs (2), flags (12) TWI (1), and general-purpose I/O (9) to the DPI_P14–1 pins.

      We recommend to refer Chapter 6 and " SRU Programming" topic under SPORT, UART, Timers chapters in the below linked HRM
      www.analog.com/.../ADSP-2137x_hwr_rev2.2.pdf

      Also, we have examples for ADSP-21369 using VisualDSP++ in the below installation path:
      <Installation path>Analog Devices\VisualDSP 5.1.2\213xx\Examples\ADSP-21369 EZ-KIT Lite

      Refer these examples, which uses DAI and DPI initialization for peripherals.

      Regards,
      Anand Selvaraj.
      
			
      

		
		
		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
						
				
						
				
				
		
		
      
			
		
      
	
      

      

      • 

	
    



Reply

      


    • 
	
      



	
		
	
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
			                            
                        
                on Sep 12, 2022 7:18 PM
            
            
					
      
	
      

		
		
      
					
      Hi,

      The digital application interface (DAI) and the digital peripheral interface (DPI) are comprised of a groups of peripherals and their respective signal routing units (SRU and SRU2). The inputs and outputs of the peripherals are not directly connected to external pins. Rather, the SRUs connect the peripherals to a set of pins and to each other, based on a set of configuration registers. This allows the peripherals to be interconnected to suit a wide variety of systems.

      The DAI SRU provides the connection from the serial ports (8), the SRC module, the S/PDIF module, input data ports (2), and the precision clock generators (4), to the DAI_P20–1 pins.

      The DPI SRU provides the connection from the timers (3), SPIs (2), UARTs (2), flags (12) TWI (1), and general-purpose I/O (9) to the DPI_P14–1 pins.

      We recommend to refer Chapter 6 and " SRU Programming" topic under SPORT, UART, Timers chapters in the below linked HRM
      www.analog.com/.../ADSP-2137x_hwr_rev2.2.pdf

      Also, we have examples for ADSP-21369 using VisualDSP++ in the below installation path:
      <Installation path>Analog Devices\VisualDSP 5.1.2\213xx\Examples\ADSP-21369 EZ-KIT Lite

      Refer these examples, which uses DAI and DPI initialization for peripherals.

      Regards,
      Anand Selvaraj.
      
			
      

		
		
		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
						
				
						
				
				
		
		
      
			
		
      
	
      

      

      • 


    


Children
	
    No Data