In ADSP-SC58x, some peripheral interrupt sources are level triggered and some are edge triggered.
By default the ‘adi_int_InstallHandler’ configures a peripheral as level triggered. In order to generate an interrupt for an edge sensitive interrupt sources, user needs to configure it in the software before triggering the interrupt source using:
Some peripheral whose interrupt sources are edge sensitive are FIR,IIR, FFT, EMDMA, HADC, CGU etc.
Hi Harshit,Is it possible in ADSP-SC58x to configure interrupts in interrupt vector mode, meaning that in-case of interrupt control is not transferred to "exception vector table" rather individual interrupts are routed to their predefined locations in "interrupt vector table" (as possible in hardware vector mode of powerPc where each interrupt number acts as an offset in Interrupt Descriptor Table).?