Post Go back to editing

SC589version please

Category: Hardware

Please also provide the SC589 version

ez.analog.com/.../sample-based-talk-through-example-of-the-sc573-or-sc584-or-sc589



https://ez.analog.com/dsp/sharc-processors/adsp-sc5xxadsp-215xx/f/q-a/549015/sample-based-talk-through-example-of-the-sc573-or-sc584-or-sc589
[edited by: Brian0925 at 11:02 AM (GMT -5) on 4 Jan 2024]
Parents
  • Hi ,


    You need to change the processor settings in CCES as mentioned below.

    "Properties > C/C++ Build > Settings > Processor Settings > Processor"

    This change is enough to run the SC584 example code into SC589 EZKIT. We are able to run the project"1423.sample_based_SC584"successfully in SC589 EZKIT.

    Let us know if you need further assistance.


    Regards,
    Divya.P

Reply
  • Hi ,


    You need to change the processor settings in CCES as mentioned below.

    "Properties > C/C++ Build > Settings > Processor Settings > Processor"

    This change is enough to run the SC584 example code into SC589 EZKIT. We are able to run the project"1423.sample_based_SC584"successfully in SC589 EZKIT.

    Let us know if you need further assistance.


    Regards,
    Divya.P

Children