I would like to use the C2_FLG2 signal of ADSP-21571 (LQFP176), but if I check the data sheet
In Table 20, PC_15
In Table 23, PC_10
Which one is correct?
Since there is no Ez-Kit available for ADSP-21571 and the package and pin assignment is different for ADSP-SC573 (Ez-Kit) I will not test it quickly. I just checked in the Pin mux'ing table in the datasheet and pin mux'ing utility in the CCES, it looks like PC_10 is the correct pin. Can you test this functionality by programming this pin mux'ing mentioned in the Table 23?
Thank you for your helpful that it looks like PC_10 in Table 23 is the correct pin.
We also did not have an ADSP-21571 board so we could not test, so we asked what customer pointed out.
Therefore, If we can check the result by customer's circuit operation, we will inform you.