Hello everybody
I want to design my own PCB with the SC584, because I only need a small part of the peripheral from the Eval-Board. I only need SPI1 and SPI2, CAN0 and USB0.
I have a few questions about this:
1. where can I find information on the specifications for the pin assignment? (which pin may float, which pin needs a resistor, etc.) especially for the pins i don't need.
2. I only have an Eval license for CCES so I think I can only load programs onto the SC584 using the debugger (ICE-1000). So I just take the schematic from the debugger from the Eval board. Will this work with uploading code to my own board?
3. which components do I need in any case on my design apart from the mentioned peripherals and the corresponding power supply. What about the software switches, do I also need them in any case?
4. what other considerations do I need to take into account for the schematic?
For my design I will follow the schematic of the Eval-Board exactly wherever possible.
Many thanks for your help.
Phil
