ADSP-2156x

Q&A

by joelleoj ADSP-2156x

Latest 3 days ago by joelleoj

104 4 0

Not Answered
How to configure external clock for SPORT interface as described to get 62.5Mhz for receive 0
Not Answered

I plan to use adsp-2156x series of microcontrollers and i want to know what is meant my using SPORT with external clock and does using PCG count as an external clock in this case. As per the datasheet spec SPORT can receive data with external clock up...

Datasheet/Specs processors and dsp ADSP-21560 Processors and Microcontrollers

104 4 0
by tavinoth ADSP-2156x

Latest 12 days ago by NandiniC
84 1 0
Not Answered
Boot Mode to be used to program the external flash 0
Not Answered

I am using the EV-21569-SOM and an ICE-2000 emulator for programming. My goal is to program the external flash using the emulator and then boot the DSP from the external flash. Do we need to keep the DSP in No Boot/Custom Boot mode (BMODE [2:0] =...

hardware EV-21569-SOM Programming processors and dsp Processors and Microcontrollers ADSP-21566 Show More

84 1 0
by LeverBridge ADSP-2156x

Latest 19 days ago by NandiniC
226 5 0
Answered
Schematic review. 0
Answered

Hi everyone, I'm hoping someone with experience across DSP, analog audio, and power design might be willing to cast an eye over my schematic. I'd be grateful for any feedback on errors, oversights, or improvements across all three sheets. --- Page...

hardware ADSP-21565 processors and dsp Processors and Microcontrollers

226 5 0
by LeverBridge ADSP-2156x

Latest 1 month ago by LeverBridge

158 4 0

Answered
Power rails 0
Answered

"I'm designing a board around the ADSP-21565 with three power rails — 3.3V (ADP7104), 1.8V (AP2112K), and 1.1V (TPS62130A). The 1.8V feeds VDD_REF and VDD_ANA, the 1.1V feeds VDD_INT, and 3.3V feeds VDD_EXT. Does the ADSP-21565 have any hard power sequencing...

hardware ADSP-21565 processors and dsp Processors and Microcontrollers

158 4 0
by David_Ashman ADSP-2156x

Latest 2 months ago by David_Ashman

337 6 0

Answered
DMC pin remap 0
Answered

Hi - I'm laying out a custom PCB with a 21569 and DDR3L memory. Using the ADSP-21569 SOM evaluation board layout as a guide, I see that the 16 bit data bus is bit-swapped in order to provide better routing paths and equidistant lengths. I'm struggling...

ADSP-21569 ddr3l ADSP-21569-SOM hardware dmc ADSP2156x processors and dsp Processors and Microcontrollers Show More

337 6 0
by mako2771 ADSP-2156x

Latest 2 months ago by NandiniC
87 1 0
Not Answered
I want to extend the timer 0
Not Answered

Hi. I am waiting for the filter to settle using a timer. While the timer was running, a change occurred in the filter. I want to reset the timer to allow time for the modified filter to settle. How can I extend the duration of a timer while it is...

software crosscore embedded studio 2.11.0 ADSP-21565 ADSP-2156x processors and dsp Processors and Microcontrollers Show More

87 1 0
by BernhardM ADSP-2156x

Latest 2 months ago by NandiniC
227 2 0
Not Answered
Secure SSL when Cache is enabled 0
Not Answered

Hi, if using SecureBoot_OpenPart with cache enabled, adi_rom_Boot() failes. If running without cache it succeeds. Is there an example for a Secure Second Stage Loader with cache enabled? Regards Bernhard

ADSP-21569 3.0.3 software processors and dsp Processors and Microcontrollers Show More

227 2 0
by pjs ADSP-2156x

Latest 3 months ago by NandiniC
255 2 0
Not Answered
ADSP-21565 ASRC Usage 0
Not Answered

I am currently using the ASRC module on the ADSP-21565. We require 12 input channels and 4 output channels, all in TDM8 format. There are two TDM input data lines: we need to capture all 8 channels from the first data line, and only the first 4 channels...

software ADSP-21565 processors and dsp Processors and Microcontrollers asrc Show More

255 2 0
by InoJosh ADSP-2156x

Latest 4 months ago by NandiniC
313 3 0
Not Answered
How important is additional filtering on VDD_PLL and VDD_FPLLANA? 0
Not Answered

I have a design using the ADSP-21569. I am potentially replacing it with ADSP-21834. I have already done so on a test board, and it is working. But, there are power domains VDD_PLL and VDD_FPLLANA that don't get any special treatment on ADSP-21569 (they...

Audio Signal Processors ADSP-21834 hardware SHARC-FX SHARC Audio Processors/SoCs Show More

313 3 0
by AlClark ADSP-2156x

Latest 4 months ago by NandiniC
619 6 0
Answered
Hardware Compatibility between ADSP-21569, ADSP-21593 and ADSP-21835 0
Answered

We have board designs that support both ADSP-21569 and ADSP-21593. This means we have sufficient core supply for the 21593. I understand that the ADSP-21835 is almost pin compatible. We boot from an external SPI flash and this has changed. Can the...

ADSP-21569 Audio Signal Processors hardware ADSP-21835 SHARC Audio Processors/SoCs adsp-21593 Show More

619 6 0
by daim ADSP-2156x

Latest 5 months ago by NandiniC
602 11 0
Not Answered
DMA copy and copy working 0
Not Answered

Hi. Can you help me to understand my issue. 0. CCLK is 1GHz. 1. I have the code FUNC1 which execute some time T1 without any DMA and interrupts. 2. I have the code FUNC2 2.1. It config DMA to copy 4kBytes from L1 to L1 which may have same memory bank...

ADSP-21569 Audio Signal Processors hardware SHARC Audio Processors/SoCs

602 11 0
by daim ADSP-2156x

Latest 5 months ago by NandiniC
287 4 0
Not Answered
System Crossbars (SCB) 0
Not Answered

Hi. I have some questions about System Crossbars (SCB). 1. Where is the Sharc+ core SCB on the Figure 41-3: SCB Block Diagram? 2. How can C0_I get access to L1 according Figure 41-5: SCB Block Diagram - Interconnections? 3. On 41–12 says S2...

ADSP-21569 Audio Signal Processors Datasheet/Specs SHARC Audio Processors/SoCs

287 4 0
by BernhardM ADSP-2156x

Latest 5 months ago by BernhardM

355 5 0

Not Answered
DMC Initialization depending on anomaly 20000117 0
Not Answered

Hi, what is the correct way to initailize the dmc depending on anomaly 20000117. As i understand, the rom functions should not be used anymore. Can you provide an example project. Regards Bernhard

ADSP-21569 Audio Signal Processors 3.0.3 software SHARC Audio Processors/SoCs Show More

355 5 0
by AD9364 ADSP-2156x

Latest 5 months ago by NandiniC
155 1 0
Not Answered
EV-21569-SOM: Application Not Running After Reset When Loaded via JTAG 0
Not Answered

Hi, I am working with the EV-21569-SOM board and loading my application using JTAG via CrossCore Embedded Studio (CCES) . I am able to successfully load the code through JTAG, but when the board is reset, the Power-On Self-Test (POST) code executes...

ADSP-21569 Audio Signal Processors hardware SHARC Audio Processors/SoCs

155 1 0
by wuxiangzhi ADSP-2156x

Latest 6 months ago by NandiniC
422 3 0
Not Answered
external flash can be operated when JTAG has been locked 0
Not Answered

Hello Support Team Guys, We follow the link of " Emulation Key Disable - Q&A - ADSP-2156x - EngineerZone " for JTAG locking. Regarding the JTAG key protection of ADSP-21565, we hereby feedback our test and verification results, and have 2 questions...

Audio Signal Processors software emulation key 2.12.0 ADSP-21565 EXTERNAL FLASH SHARC Audio Processors/SoCs Show More

422 3 0

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Upcoming Learning & Events

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

Q&A

Not Answered
How to configure external clock for SPORT interface as described to get 62.5Mhz for receive 0
Not Answered

Not Answered
Boot Mode to be used to program the external flash 0
Not Answered

Answered
Schematic review. 0
Answered

Answered
Power rails 0
Answered

Answered
DMC pin remap 0
Answered

Not Answered
I want to extend the timer 0
Not Answered

Not Answered
Secure SSL when Cache is enabled 0
Not Answered

Not Answered
ADSP-21565 ASRC Usage 0
Not Answered

Not Answered
How important is additional filtering on VDD_PLL and VDD_FPLLANA? 0
Not Answered

Answered
Hardware Compatibility between ADSP-21569, ADSP-21593 and ADSP-21835 0
Answered

Not Answered
DMA copy and copy working 0
Not Answered

Not Answered
System Crossbars (SCB) 0
Not Answered

Not Answered
DMC Initialization depending on anomaly 20000117 0
Not Answered

Not Answered
EV-21569-SOM: Application Not Running After Reset When Loaded via JTAG 0
Not Answered

Not Answered
external flash can be operated when JTAG has been locked 0
Not Answered

Q&A

Not Answered How to configure external clock for SPORT interface as described to get 62.5Mhz for receive 0 Not Answered

Not Answered Boot Mode to be used to program the external flash 0 Not Answered

Answered Schematic review. 0 Answered

Answered Power rails 0 Answered

Answered DMC pin remap 0 Answered

Not Answered I want to extend the timer 0 Not Answered

Not Answered Secure SSL when Cache is enabled 0 Not Answered

Not Answered ADSP-21565 ASRC Usage 0 Not Answered

Not Answered How important is additional filtering on VDD_PLL and VDD_FPLLANA? 0 Not Answered

Answered Hardware Compatibility between ADSP-21569, ADSP-21593 and ADSP-21835 0 Answered

Not Answered DMA copy and copy working 0 Not Answered

Not Answered System Crossbars (SCB) 0 Not Answered

Not Answered DMC Initialization depending on anomaly 20000117 0 Not Answered

Not Answered EV-21569-SOM: Application Not Running After Reset When Loaded via JTAG 0 Not Answered

Not Answered external flash can be operated when JTAG has been locked 0 Not Answered

Not Answered
How to configure external clock for SPORT interface as described to get 62.5Mhz for receive 0
Not Answered

Not Answered
Boot Mode to be used to program the external flash 0
Not Answered

Answered
Schematic review. 0
Answered

Answered
Power rails 0
Answered

Answered
DMC pin remap 0
Answered

Not Answered
I want to extend the timer 0
Not Answered

Not Answered
Secure SSL when Cache is enabled 0
Not Answered

Not Answered
ADSP-21565 ASRC Usage 0
Not Answered

Not Answered
How important is additional filtering on VDD_PLL and VDD_FPLLANA? 0
Not Answered

Answered
Hardware Compatibility between ADSP-21569, ADSP-21593 and ADSP-21835 0
Answered

Not Answered
DMA copy and copy working 0
Not Answered

Not Answered
System Crossbars (SCB) 0
Not Answered

Not Answered
DMC Initialization depending on anomaly 20000117 0
Not Answered

Not Answered
EV-21569-SOM: Application Not Running After Reset When Loaded via JTAG 0
Not Answered

Not Answered
external flash can be operated when JTAG has been locked 0
Not Answered