Question 10ch Analog Audio IN and 1ch Analog Audio OUT using ADZS-SC589-EZLITE.

Hi,

As you know ADSP-SC589 EZLITE board has 4 In/Out audio channels. If you need to use 10ch audio inputs & an 1ch audio out, you have to choose the ADC accordingly.

It seems you are already referring ADZS-SC589-EZLITE schematics, we would suggest you to refer the same.

Regards,
Anand Selvaraj.

Dear Anand,

I have a question.

Below this is a RTC part of schematics for ADSP-SC589 EZLITE. 

PDF

I apply SuperCap(that spec is attached a file) to RTC battery(J1).

But SuperCap is not charged powered on in 12hours.
(The Supercap is measured 0V)

So, I have a question.

Is that RTC circuit need to modified? Or need to setting register of ADSP-SC589?

Please, reply my question.

Thank you.

Best Regards,

Inho Jeon

Hi,

This issue is already handled through below thread. To avoid duplication of efforts, you can continue the discussions there.

ez.analog.com/.../rtc-battery-of-adsp-sc589-ezite-is-not-charged

Regards,
Anand Selvaraj.

Hi,

This issue is already handled through below thread. To avoid duplication of efforts, you can continue the discussions there.

ez.analog.com/.../rtc-battery-of-adsp-sc589-ezite-is-not-charged

Regards,
Anand Selvaraj.