I'm using BF-609 in one of our Hardware. After Power ON,the JTAG has been connected to the Hardware and passed the jtag configuration test (scan path) but during debug we got the exception (as attached) at the very first at adi_initComponents() and the application has been halted. I have tried the following options i.e 1. Cleaned and re-built the project. 2. Created new project in the new workspace with default settings of BF609 ,built and loaded using ICE-2000 emulator. I had tried with new project with empty code(just c code with simple for loop) as well as with the available examples provided in the CCES IDE (1.1.0) with our Hardware Card in different workspaces but the code is generating the same exception at the very first at adi_initComponents(). Please post the solution to this exception.
Hi GK Rao,
An SR has been logged through private support for this issue, and will continue to be dealt with through that channel. We will post the outcome here, if appropriate.
Dear Janardhan I have posted this question so many ways but can't get any
I hope u solve my problem
We are trying to load two .ldr files (one .ldr file for system software
with customized kernel, another .ldr file application software with default
kernel) through EPROM (Externel Port), the 2 ldr fil;es in different
sectors of single flash memory.
We are in the process of customizing boot kernel.
Here, we are trying to load two .ldr files, based on the flag_0 IO pin
We need support regarding the placement of the second ldr’s flash base
address in boot kernel file.
If not FLAG0_IN jump (pc,3);
ustat1=0x410600; //2nd .ldr’s base address.
Note: We referred EE – 345, EE – 56 and my.asm attached.
Please do the needful as early as possible.
On Tue 31 Jul, 2018, 7:01 PM ramana reddy, <email@example.com>
As we are dealing this query through private support, please continue the discussion there to avoid duplication of effort.
Please post solution as early as possible
Thanks & Regards
G Koteswara Rao