• State Verified Answer
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 56 subscribers
  • Views 1728 views
  • Users 0 members are here
Options
Similar Content 

        

            Post
             Go back to editing
        

    

    


    

    









		












	
	
			
	
			
		
	
	
		

		
Programmer for the Blackfin DSPs



		

			

									
					    Ali_Alsaqqa
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Jun 16, 2013 
				
			
			
		
    

				
		
    
		    		    
		    
		    	
			
    Hi,
    
 
    I didn't find a "programmer only" for the Blackfin processors, specifically the BF5xx series. By programmer I mean a device that takes in the code image from the PC and download it to the processor program memory. I found the ADZS-ICE-100B, which is an emulator. I am not sure if this is what I want, but I was thinking about a programmer only, no additional functionality.
    
 
    EDIT: here is a $750 third party programmer. Any ideas of a low cost solution (<$100) ?
    
 
    Regards,
    
 
    Ali
    
									
			        
		
    

				
						
        

		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    


	
    
		
	
    















    
	
    
	
    
					



			








	
	
	
	



Parents
	
      
	

    • 
	
      



	
			
		
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
			                            
                                                                                                                        
            
				
			
            
					
      
	
      

		
		
      
					
      Hi Ali,
      
 
      It depends on what you require. If you are looking for production flash programming, we typically recommend programmers such as the Danville Signal one you link to above. There are other solutions from Ronetix and www.jtag.com, however neither offers a solution <$100 that I am aware of.
      
 
      For development and small-scale programming for testing, the ICE-100B may be an option. However, we always advise that the connectors on our Emulators are designed with development and debugging in mind. They have not be designed to withstand production line stresses of being connected and disconnected with the level of frequency that would be expected in a production environment. This isn't supported, and use in such an environment would void the warranty.
      
 
      Furthermore, we don't provide any stand-alone software tool for programming flash, and your options would be to use a licensed version of the CCES tools, or use the Stand-Alone Flash Programmer of the VisualDSP++ tools (which require a complete installation of the VisualDSP++ tools).
      
 
      If you can provide a little more detail on your exact requirements, we may be able to suggest something else, but Analog Devices do not provide any stand-alone flash-programming solution.
      
 
      Regards,
      
 
      Craig.
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
						
						
						
				
				
		
		
      
			
		
      
	
      

      

      • 

	
    



Reply

      


    • 
	
      



	
			
		
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
			                            
                                                                                                                        
            
				
			
            
					
      
	
      

		
		
      
					
      Hi Ali,
      
 
      It depends on what you require. If you are looking for production flash programming, we typically recommend programmers such as the Danville Signal one you link to above. There are other solutions from Ronetix and www.jtag.com, however neither offers a solution <$100 that I am aware of.
      
 
      For development and small-scale programming for testing, the ICE-100B may be an option. However, we always advise that the connectors on our Emulators are designed with development and debugging in mind. They have not be designed to withstand production line stresses of being connected and disconnected with the level of frequency that would be expected in a production environment. This isn't supported, and use in such an environment would void the warranty.
      
 
      Furthermore, we don't provide any stand-alone software tool for programming flash, and your options would be to use a licensed version of the CCES tools, or use the Stand-Alone Flash Programmer of the VisualDSP++ tools (which require a complete installation of the VisualDSP++ tools).
      
 
      If you can provide a little more detail on your exact requirements, we may be able to suggest something else, but Analog Devices do not provide any stand-alone flash-programming solution.
      
 
      Regards,
      
 
      Craig.
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
						
						
						
				
				
		
		
      
			
		
      
	
      

      

      • 


    


Children
	
    No Data