I made a second stage loader for a custom board with an SC572 chipset, but when I try booting from SPI flash using the adi_rom_boot() function it never works.
I tested that the loader works because when I write to the flash at address 0x00 it boots normally with the OTP bootloader.
I followed the documentation, and this is how I call the function.
uint32_t boot_address = FLASH_XIP_BASE_ADDR + APP_OFFSET;
uint32_t boot_cmd = (
adi_rom_Boot((void *)boot_address, 0, 0, 0, boot_cmd);
any help would be appreciated, thank you!