Flash programming for BF703 :


    There is a Flash programming problem for BF703.

I referred to the EE-372 document to develop LED Blink example on a self target board. 

The program worked under debug mode.

The bf707_w25q32bv_dpia.dxe had been modified for flash W25Q128JVPIQ and The CLKIN had been modified in int_BF707.dxe. 

CCES invoked CLDP.exe to program flash and it was done. Power cycled the board but boot failed from flash.

I can ascertain that the board is workable because the other process worked normally.

There must be some issues. Please help me to fix it.