Post Go back to editing

Decoder extender board problem


I have an ADS-BF609 EZ-board  rev 1.1 with ADSP_BF609 rev 0.2 BOM rev 1.4. To this board, I attached a video decoder extender board BOM rev 1.1. I am working with Crosscore 2.2 (latest one).

The capture is working fine only for three frames. Then no capture occurs.

I also tested the "Frame Capture" example under "Video_Decoder_EI3_Extender_Board-Rel1.1.0\Video_Decoder_EI3".

The same problem exists.

Do you have an example for frame capture under the above settings.