2010-04-23 03:11:31     Booting Error

Document created by Aaronwu Employee on Sep 25, 2013
Version 1Show Document
  • View in full screen mode

2010-04-23 03:11:31     Booting Error

suresh kumar (INDIA)

Message: 88795   

 

Hi,

 

I am using BF537 processor with SST39VF3201 flash.

 

I have been sucessfully loaded u-boot.bin into flash.

 

While i am booting from flash, i am getting error.

 

 

 

 

 

 

 

 

 

[root@tps u-boot-1.1.6-2008R1.5]# minicom -o

 

Welcome to minicom 2.2

 

OPTIONS: I18n

Compiled on Sep 25 2007, 06:13:56.

Port /dev/ttyS0

 

              Press CTRL-A Z for help on special keys

 

U-Boot 1.1.6 (ADI-2008R1.5) (May  4 2009 - 16:44:45)

 

CPU:   ADSP bf537-0.2 (Detected Rev: 0.3)

Board: ADI BF537 stamp board

      Support: http://blackfin.uclinux.org/

Clock: VCO: 500 MHz, Core: 500 MHz, System: 100 MHz

RAM:   64 MB

Flash:

 

Ack! Something bad happened to the Blackfin!

 

SEQUENCER STATUS:

SEQSTAT: 00000021  IPEND: 3fc00bc  SYSCFG: 0032

HWERRCAUSE: 0x0

EXCAUSE   : 0x21

physical IVG7 asserted : <0x03fc0744> { _evt_default + 0x0 }

RETE: <0xbaad05c4> { ___smulsi3_highpart + 0xb6af6f68 }

RETN: <0x6b0e5ca7> { ___smulsi3_highpart + 0x6710c64b }

RETX: <0x00a06c7c> /* unknown address */

RETS: <0x00000000> /* Maybe null pointer? */

PC  : <0x03fc00bc> { _start + 0xbc }

DCPLB_FAULT_ADDR: <0x03fe86c  { ___smulsi3_highpart + 0xf06c }

ICPLB_FAULT_ADDR: <0x00a06c7c> /* unknown address */

 

PROCESSOR STATE:

R0 : 00000010    R1 : 00000008    R2 : 00000810    R3 : 00000000

R4 : 20000000    R5 : 00000000    R6 : 1dcd6500    R7 : 000000ff

P0 : 03fe86bc    P1 : 0bea06bc    P2 : 07f446bc    P3 : 03f5c000

P4 : 03fe86bc    P5 : 03f5c000    FP : 03fe86bc    SP : 03f5be0c

LB0: 03fd9624    LT0: 03fd9618    LC0: 00000000

LB1: 03fc68d6    LT1: 03fc68d4    LC1: 00000000

B0 : b6572cf8    L0 : 00000000    M0 : e5f7beff    I0 : 03f5becc

B1 : bfffe6a3    L1 : 00000000    M1 : f597acb7    I1 : 20040000

B2 : ddf5ae37    L2 : 00000000    M2 : ffc7ad3f    I2 : fffe677f

B3 : fecdf5f3    L3 : 00000000    M3 : d7e4edb7    I3 : f97ebedf

A0.w: 01900000   A0.x: 00000000   A1.w: 00004029   A1.x: 00000000

USP : 9b67d77f  ASTAT: 00000000

 

Hardware Trace:

  0 Target : <0x03fc04ec> { _bfin_panic + 0x0 }

    Source : <0x03fc0670> { _trap_c + 0x148 }

  1 Target : <0x03fc0664> { _trap_c + 0x13c }

    Source : <0x03fc0544> { _trap_c + 0x1c }

  2 Target : <0x03fc0528> { _trap_c + 0x0 }

    Source : <0x03fc06ea> { _trap + 0x56 }

  3 Target : <0x03fc0694> { _trap + 0x0 }

    Source : <0x00a06c7a> /* unknown address */

  4 Target : <0x00000000> /* Maybe null pointer? */

    Source : <0x03fcb42a> { _flash_write_cmd + 0x7a }

  5 Target : <0x03fcb424> { _flash_write_cmd + 0x74 }

    Source : <0x03fcb3f2> { _flash_write_cmd + 0x42 }

  6 Target : <0x03fcb3e  { _flash_write_cmd + 0x38 }

    Source : <0x03fcb3e0> { _flash_write_cmd + 0x30 }

  7 Target : <0x03fcb3d6> { _flash_write_cmd + 0x26 }

    Source : <0x03fcb3ae> { _flash_make_cmd + 0x3a }

  8 Target : <0x03fcb396> { _flash_make_cmd + 0x22 }

    Source : <0x03fcb390> { _flash_make_cmd + 0x1c }

  9 Target : <0x03fcb386> { _flash_make_cmd + 0x12 }

    Source : <0x03fcb3a  { _flash_make_cmd + 0x34 }

10 Target : <0x03fcb396> { _flash_make_cmd + 0x22 }

    Source : <0x03fcb390> { _flash_make_cmd + 0x1c }

11 Target : <0x03fcb386> { _flash_make_cmd + 0x12 }

    Source : <0x03fcb3a  { _flash_make_cmd + 0x34 }

12 Target : <0x03fcb396> { _flash_make_cmd + 0x22 }

    Source : <0x03fcb390> { _flash_make_cmd + 0x1c }

13 Target : <0x03fcb386> { _flash_make_cmd + 0x12 }

    Source : <0x03fcb3a  { _flash_make_cmd + 0x34 }

14 Target : <0x03fcb396> { _flash_make_cmd + 0x22 }

    Source : <0x03fcb390> { _flash_make_cmd + 0x1c }

15 Target : <0x03fcb386> { _flash_make_cmd + 0x12 }

    Source : <0x03fcb3a  { _flash_make_cmd + 0x34 }

 

Please reset the board

 

### ERROR ### Please RESET the board ###

QuoteReplyEditDelete

 

 

2010-04-23 11:27:51     Re: Booting Error

Mike Frysinger (UNITED STATES)

Message: 88830   

 

that is an old version of u-boot.  upgrade to the latest.

QuoteReplyEditDelete

 

 

2010-05-04 02:10:36     Re: Booting Error

suresh kumar (INDIA)

Message: 89098   

 

In New version(u-boot-2008.10-2009R1.1-rc1)  also i am getting same kind of error.

 

 

 

[root@tps u-boot-2008.10-2009R1.1-rc1]# minicom -o

 

 

Welcome to minicom 2.2

 

OPTIONS: I18n

Compiled on Sep 25 2007, 06:13:56.

Port /dev/ttyS0

 

               Press CTRL-A Z for help on special keys

 

 

U-Boot 1.1.6 (ADI-2008R1.5) (May  4 2009 - 16:44:45)

 

CPU:   ADSP bf537-0.2 (Detected Rev: 0.3)

Board: ADI BF537 stamp board

       Support: http://blackfin.uclinux.org/

Clock: VCO: 500 MHz, Core: 500 MHz, System: 100 MHz

RAM:   64 MB

Flash:

 

 

Ack! Something bad happened to the Blackfin!

 

SEQUENCER STATUS:

SEQSTAT: 00000021  IPEND: 3fc00bc  SYSCFG: 0032

  HWERRCAUSE: 0x0

  EXCAUSE   : 0x21

  physical IVG7 asserted : <0x03fc0744> { _evt_default + 0x0 }

RETE: <0xbaad05c4> { ___smulsi3_highpart + 0xb6af6f68 }

RETN: <0x6b0e5ca7> { ___smulsi3_highpart + 0x6710c64b }

RETX: <0x00000000> /* Maybe null pointer? */

RETS: <0x00000000> /* Maybe null pointer? */

PC  : <0x03fc00bc> { _start + 0xbc }

DCPLB_FAULT_ADDR: <0x03f5bedc> /* unknown address */

ICPLB_FAULT_ADDR: <0x00000000> /* Maybe null pointer? */

 

PROCESSOR STATE:

R0 : 00000010    R1 : 00000008    R2 : 00000010    R3 : 00000000

R4 : 20000000    R5 : 05f5e100    R6 : 1dcd6500    R7 : 000000ff

P0 : 03fe86bc    P1 : 00000000    P2 : 03f5bedb    P3 : 03f5c000

P4 : 03fe86bc    P5 : 03f5c000    FP : 03fe86bc    SP : 03f5be0c

LB0: 03fd9624    LT0: 03fd9618    LC0: 00000000

LB1: 03fc68d6    LT1: 03fc68d4    LC1: 00000000

B0 : be572ce8    L0 : 00000000    M0 : e1ffbeef    I0 : 03f5becc

B1 : ffffe6a3    L1 : 00000000    M1 : f597acb3    I1 : 20040000

B2 : ddf5ae27    L2 : 00000000    M2 : ffc7ad2e    I2 : fffe737f

B3 : fecdf5f3    L3 : 00000000    M3 : d7e4eda7    I3 : 797ebedf

A0.w: 01900000   A0.x: 00000000   A1.w: 00004029   A1.x: 00000000

USP : 9b67d77f  ASTAT: 00001004

 

Hardware Trace:

   0 Target : <0x03fc04ec> { _bfin_panic + 0x0 }

     Source : <0x03fc0670> { _trap_c + 0x148 }

   1 Target : <0x03fc0664> { _trap_c + 0x13c }

     Source : <0x03fc0544> { _trap_c + 0x1c }

   2 Target : <0x03fc0528> { _trap_c + 0x0 }

     Source : <0x03fc06ea> { _trap + 0x56 }

   3 Target : <0x03fc0694> { _trap + 0x0 }

     Source : <0x03fcb42a> { _flash_write_cmd + 0x7a }

   4 Target : <0x03fcb424> { _flash_write_cmd + 0x74 }

     Source : <0x03fcb3f2> { _flash_write_cmd + 0x42 }

   5 Target : <0x03fcb3e8> { _flash_write_cmd + 0x38 }

     Source : <0x03fcb3e0> { _flash_write_cmd + 0x30 }

   6 Target : <0x03fcb3d6> { _flash_write_cmd + 0x26 }

     Source : <0x03fcb3ae> { _flash_make_cmd + 0x3a }

   7 Target : <0x03fcb396> { _flash_make_cmd + 0x22 }

     Source : <0x03fcb390> { _flash_make_cmd + 0x1c }

   8 Target : <0x03fcb386> { _flash_make_cmd + 0x12 }

     Source : <0x03fcb3a8> { _flash_make_cmd + 0x34 }

   9 Target : <0x03fcb396> { _flash_make_cmd + 0x22 }

     Source : <0x03fcb390> { _flash_make_cmd + 0x1c }

  10 Target : <0x03fcb386> { _flash_make_cmd + 0x12 }

     Source : <0x03fcb3a8> { _flash_make_cmd + 0x34 }

  11 Target : <0x03fcb396> { _flash_make_cmd + 0x22 }

     Source : <0x03fcb390> { _flash_make_cmd + 0x1c }

  12 Target : <0x03fcb386> { _flash_make_cmd + 0x12 }

     Source : <0x03fcb3a8> { _flash_make_cmd + 0x34 }

  13 Target : <0x03fcb396> { _flash_make_cmd + 0x22 }

     Source : <0x03fcb390> { _flash_make_cmd + 0x1c }

  14 Target : <0x03fcb386> { _flash_make_cmd + 0x12 }

     Source : <0x03fcb3a8> { _flash_make_cmd + 0x34 }

  15 Target : <0x03fcb396> { _flash_make_cmd + 0x22 }

     Source : <0x03fcb390> { _flash_make_cmd + 0x1c }

 

Please reset the board

 

### ERROR ### Please RESET the board ###

 

 

 

 

 

 

 

 

Suresh

QuoteReplyEditDelete

 

 

2010-05-04 02:14:20     Re: Booting Error

Mike Frysinger (UNITED STATES)

Message: 89099   

 

that is not a new version.  like your log clearly shows:

U-Boot 1.1.6 (ADI-2008R1.5) (May  4 2009 - 16:44:45)

QuoteReplyEditDelete

 

 

2010-05-05 06:59:47     Re: Booting Error

suresh kumar (INDIA)

Message: 89154   

 

Hi Mike,

 

Do you mean, i want to download u-boot-trunk-svn.src.tar.bz2.

 

What is the problem in last vesion.

 

 

 

 

 

 

 

 

 

 

 

Suresh

QuoteReplyEditDelete

 

 

2010-05-05 15:07:55     Re: Booting Error

Mike Frysinger (UNITED STATES)

Message: 89161   

 

i said use the latest release.  that is 2009R1.1.

Attachments

    Outcomes