2009-10-26 22:35:45     How to load the uclinux from SDRAM to the flash?

Document created by Aaronwu Employee on Sep 24, 2013
Version 1Show Document
  • View in full screen mode

2009-10-26 22:35:45     How to load the uclinux from SDRAM to the flash?

zhang zhihua (CHINA)

Message: 81728   

 

I  use the ADSP-BF518F EZ-Board to develop a system,at the frist,I use the tftp to loaded the files to the SDRAM like this:

 

bfin> tftp 1000000 vmImage

Using Blackfin EMAC device

TFTP from server 192.168.0.2; our IP address is 192.168.0.15

Filename 'vmImage'.

Load address: 0x1000000

Loading: #################################################################

         ##########

done

Bytes transferred = 1090625 (10a441 hex)

 

"bfin> tftp 1000000 rootfs.jffs2

Using Blackfin EMAC device

TFTP from server 192.168.0.2; our IP address is 192.168.0.15

Filename 'rootfs.jffs2'.

Load address: 0x1000000

Loading: #################################################################

         #############################

done

Bytes transferred = 1376256 (150000 hex)"

 

but then I don't know how to load the files to my flash,please tell me!

 

Thank you!

TranslateQuoteReplyEditDelete

 

 

2009-10-26 23:09:21     Re: How to load the uclinux from SDRAM to the flash?

Mike Frysinger (UNITED STATES)

Message: 81730   

 

we have a documentation wiki you should try searching

 

http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot:parallel-flash

QuoteReplyEditDelete

 

 

2009-10-26 23:18:17     Re: How to load the uclinux from SDRAM to the flash?

zhang zhihua (CHINA)

Message: 81731   

 

Thank you for your advice!

Attachments

    Outcomes