2009-04-01 02:39:26     Compilation of uboot for custom board failed

Document created by Aaronwu Employee on Sep 18, 2013
Version 1Show Document
  • View in full screen mode

2009-04-01 02:39:26     Compilation of uboot for custom board failed

Kaustubh Vaidya (INDIA)

Message: 71924   

 

Hello,

 

I designed BF532 based custom board.I am trying to port u-boot-2009.01 on my custom board.I reffered to documentation of adding custom board to uboot .But while compiling the uboot it gtves me following error,

 

make[1]: Leaving directory `/media/disk-1/download/u-boot-2009.01/post'

make -C board/stplbf532/

make[1]: Entering directory `/media/disk-1/download/u-boot-2009.01/board/stplbf532'

make[1]: *** No rule to make target `.depend', needed by `libstplbf532.a'.  Stop.

make[1]: Leaving directory `/media/disk-1/download/u-boot-2009.01/board/stplbf532'

make: *** [board/stplbf532/libstplbf532.a] Error 2

 

 

I have added all the required files in the board directory but still I cant figure out what is the solution.So please suggest me solution for this problem.

 

Thank you........

QuoteReplyEditDelete

 

 

2009-04-01 03:15:57     Re: Compilation of uboot for custom board failed

Mike Frysinger (UNITED STATES)

Message: 71925   

 

you really shouldnt be using 2009.01.  that version is dead now.

 

the error you're hitting is due to your board dir.  every board has to have a .c file in it named the same as the board.

QuoteReplyEditDelete

 

 

2009-04-01 03:30:52     Re: Compilation of uboot for custom board failed

Kaustubh Vaidya (INDIA)

Message: 71927   

 

Yes I already have that .c file having same name of the board . I followed all the instructions from documenatation.Still gettinng same error.

QuoteReplyEditDelete

 

 

2009-04-01 03:52:10     Re: Compilation of uboot for custom board failed

Mike Frysinger (UNITED STATES)

Message: 71928   

 

i'm not going to guess.  you'll have to post a tarball of your board dir.

Attachments

    Outcomes