2009-02-23 18:06:12     "start address not on sector boundary" 2008R1.5

Document created by Aaronwu Employee on Sep 18, 2013
Version 1Show Document
  • View in full screen mode

2009-02-23 18:06:12     "start address not on sector boundary" 2008R1.5

blue hash (UNITED STATES)

Message: 69776   

 

Hi there,

 

For some reason, when I do a saveenv I get "start address not on sector boundary" error. Someone had the same problem. His CFG_ENV_SECT_SIZE     was set wrong.  Mine is set right at 0x2000 I have a 4MB flash on a custom board same as the stamp. Any other hints would be helpful. Thanks.

QuoteReplyEditDelete

 

 

2009-02-23 18:12:50     Re: "start address not on sector boundary" 2008R1.5

Mike Frysinger (UNITED STATES)

Message: 69777   

 

verify every define which is used by saveenv is properly sized/aligned

Attachments

    Outcomes