2009-01-30 09:29:44     Ethernet POST failed very often

Document created by Aaronwu Employee on Sep 18, 2013
Version 1Show Document
  • View in full screen mode

2009-01-30 09:29:44     Ethernet POST failed very often

igor lektorov (BELARUS)

Message: 68582   

 

I use Ethernet POST with loopback connector. After several times, test don't finished well.

 

In my config file:

 

#define CONFIG_POST (POST_ETHER)

 

My PHY device - DP83848, CPU - BF537

 

And if I switch off my board and switch on in 5 - 10 min, POST ok.

 

What's may happened?

 

 

QuoteReplyEditDelete

 

 

2009-01-30 09:46:30     Re: Ethernet POST failed very often

Mike Frysinger (UNITED STATES)

Message: 68586   

 

are you talking about u-boot POST ?  it is broken in 2008R1.5+, so dont try.

QuoteReplyEditDelete

 

 

2009-01-30 11:23:25     Re: Ethernet POST failed very often

igor lektorov (BELARUS)

Message: 68593   

 

Yes, it's u-boot POST, but why 2008R1.5? u-boot is separate branch from uClinux-dist...

QuoteReplyEditDelete

 

 

2009-01-30 13:35:46     Re: Ethernet POST failed very often

Mike Frysinger (UNITED STATES)

Message: 68596   

 

i dont know what your point is as the uclinux-dist version is irrelevant ...

 

the u-boot POST code has been broken since 2008R1

Attachments

    Outcomes