2008-04-27 21:17:10     how to port u-boot to Target Board through ethernet debugger

Document created by Aaronwu Employee on Sep 17, 2013
Version 1Show Document
  • View in full screen mode

2008-04-27 21:17:10     how to port u-boot to Target Board through ethernet debugger

a manjula (INDIA)

Message: 55072    Hi,

             I have 2 questions in developing the new hardware BF527.    

 

1.    I have build new u-boot.bin.  Now I want to port this u-boot.bin to target board through ethernet debugger.

I am to load the u-boot.bin through command

                                  memory load tftp://10.1.1.20/u-boot.bin bin  0x1000

this command is working fine. But When I give next command that is

 

                                 go 0x1000

this is not working properly, it is coming out of command line without any errors.

 

Please if anybody knows where is the problem please guide me

 

2.     Please guide me if any body knows how to configure ethernet for the newly developed board(BF527).

 

 

Regards,

Manju

QuoteReplyEditDelete

 

 

2008-04-27 21:28:48     Re: how to port u-boot to Target Board through ethernet debugger

Mike Frysinger (UNITED STATES)

Message: 55074    i dont know what this "ethernet debugger" is you're talking about, but please read the documentation:

http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot

Attachments

    Outcomes