2008-04-21 10:55:38     u-boot crashes on saveenv

Document created by Aaronwu Employee on Sep 17, 2013
Version 1Show Document
  • View in full screen mode

2008-04-21 10:55:38     u-boot crashes on saveenv

blue hash (UNITED STATES)

Message: 54631    Issuing a saveenv or save  command seems to crash u-boot-1.1.6.

board- bf537 custom, with 4Mb flash

All other commands concerning the flash work ok

My trace file is attached.

boot-trace.txt

QuoteReplyEditDelete

 

 

2008-04-21 15:00:18     Re: u-boot crashes on saveenv

Mike Frysinger (UNITED STATES)

Message: 54638    that says u-boot is crashing while reading the environment, not while saving ... is that what you meant ?

QuoteReplyEditDelete

 

 

2008-04-21 15:19:27     Re: u-boot crashes on saveenv

blue hash (UNITED STATES)

Message: 54641    Sorry, I wasnt clear.

When the saveenv/save command is issued and the board is rebooted, I get the trace error.

It saves it to the environment ok.

QuoteReplyEditDelete

 

 

2008-04-21 17:49:41     Re: u-boot crashes on saveenv

Mike Frysinger (UNITED STATES)

Message: 54652    did you declare the right flash parameters in your board config ?  if it's too small, things may randomly crash

 

you can also try turning off CFG_FLASH_PROTECTION

QuoteReplyEditDelete

 

 

2008-04-22 11:03:41     Re: u-boot crashes on saveenv

blue hash (UNITED STATES)

Message: 54733    Thanks, there was a misconfiguration in my flash settings. It works now.

Attachments

Outcomes