2008-04-10 06:02:04     bf533 ezkit u-boot problem

Document created by Aaronwu Employee on Sep 17, 2013
Version 1Show Document
  • View in full screen mode

2008-04-10 06:02:04     bf533 ezkit u-boot problem

lujie yin (CHINA)

Message: 54023   

 

HI all:

 

    My board is bf533-ezkit REV 2.1 .I connected the board with PC by usb cable.And I start it like that:

 

VDSP++(4.5) ->Tools->Flash programmer, BF533FzFlash.DXE.LOAD FILE ,then chose Binary ,u-boot_ezkit.bin then programmer it,when it completed,reset the board ,but I can see nothing in hyper termin(com1,576000,8,1),I try all the Bmoder 00.01.10.11,the Hypertermin still have nothing.

 

    what can I do? please give me some advise ,THANKS!

QuoteReplyEditDelete

 

 

2008-04-10 07:53:57     Re: bf533 ezkit u-boot problem

Robin Getz (UNITED STATES)

Message: 54027    Lujie:

 

If you are programming it with VDSP - we can't help - as we do not ever use that.

 

Try:

http://www.analog.com/processors/technicalSupport/index.html

 

-Robin

QuoteReplyEditDelete

 

 

2008-04-10 15:27:02     Re: bf533 ezkit u-boot problem

Mike Frysinger (UNITED STATES)

Message: 54044    the referred file "u-boot_ezkit.bin" is not from the 2008R1 release.  always use the latest release.

Attachments

    Outcomes