[#5440] pictureflow doesn't work

Document created by Aaronwu Employee on Sep 4, 2013
Version 1Show Document
  • View in full screen mode

[#5440] pictureflow doesn't work

Submitted By: Vivi Li

Open Date

2009-08-13 21:55:11     Close Date

2010-02-22 04:14:57

Priority:

Medium     Assignee:

Barry Song

Status:

Closed     Fixed In Release:

N/A

Found In Release:

2009R1-RC6     Release:

Category:

Tests     Board:

N/A

Processor:

ALL     Silicon Revision:

Is this bug repeatable?:

Yes     Resolution:

Fixed

Uboot version or rev.:

    Toolchain version or rev.:

gcc4.1-09r1_rc9

App binary format:

N/A     

Summary: pictureflow doesn't work

Details:

 

pictureflow doesn't work in fdpic or flat format, while qt examples can work alright.

No pictures show on screen.

 

Bellow is the log for bf527:

--

U-Boot 2008.10-svn1982 (ADI-2009R1-rc3) (Jul 26 2009 - 20:15:27)

 

CPU:   ADSP bf527-0.0 (Detected Rev: 0.2) (parallel flash boot)

Board: ADI BF527 EZ-Kit board

       Support: http://blackfin.uclinux.org/

Clock: VCO: 525 MHz, Core: 525 MHz, System: 131.250 MHz

RAM:   64 MB

Flash:  4 MB

In:    serial

Out:   serial

Err:   serial

Net:   Blackfin EMAC

MAC:   00:E0:22:FE:BF:81

Hit any key to stop autoboot:  0

bfin> run ramboot

Using Blackfin EMAC device

TFTP from server 10.100.4.174; our IP address is 10.100.4.50

Filename 'uImage'.

Load address: 0x1000000

Loading: #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #################################################################

         #####################################################

done

Bytes transferred = 8409278 (8050be hex)

## Booting kernel from Legacy Image at 01000000 ...

   Image Name:   Linux-2.6.28.10-ADI-2009R1-svn71

   Created:      2009-08-14  13:39:01 UTC

   Image Type:   Blackfin Linux Kernel Image (gzip compressed)

   Data Size:    8409214 Bytes =  8 MB

   Load Address: 00001000

   Entry Point:  001cf920

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

Starting Kernel at = 001cf920

Linux version 2.6.28.10-ADI-2009R1-svn7171 (test@uboot30-527ezkit) (gcc version 4.1.2 (ADI svn)) #121 Fri Aug 14 13:38:44 GMT 209

bootconsole [early_shadow0] enabled

bootconsole [early_BFuart0] enabled

early printk enabled on early_BFuart0

Board Memory: 64MB

Kernel Managed Memory: 64MB

Memory map:

  fixedcode = 0x00000400-0x00000490

  text      = 0x00001000-0x00135c80

  rodata    = 0x00135c80-0x0019a994

  bss       = 0x0019b000-0x001ac180

  data      = 0x001ac180-0x001c2000

    stack   = 0x001c0000-0x001c2000

  init      = 0x001c2000-0x00f53000

  available = 0x00f53000-0x03eff000

  DMA Zone  = 0x03f00000-0x04000000

Hardware Trace Active and Enabled

Boot Mode: 1

Reset caused by Software reset

Blackfin support (C) 2004-2009 Analog Devices, Inc.

Compiled for ADSP-BF527 Rev 0.2

Blackfin Linux support by http://blackfin.uclinux.org/

Processor Speed: 525 MHz core clock and 131 MHz System Clock

NOMPU: setting up cplb tables

Instruction Cache Enabled for CPU0

Data Cache Enabled for CPU0 (write-back)

Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 16001

Kernel command line: root=/dev/mtdblock0 rw clkin_hz=25000000 earlyprintk=serial,uart1,57600 console=tty0 console=ttyBF0,57600 if

Configuring Blackfin Priority Driven Interrupts

PID hash table entries: 256 (order: 8, 1024 bytes)

Linux version 2.6.28.10-ADI-2009R1-svn7171 (test@uboot30-527ezkit) (gcc version 4.1.2 (ADI svn)) #121 Fri Aug 14 13:38:44 GMT 209

Linux version 2.6.28.10-ADI-2009R1-svn7171 (test@uboot30-527ezkit) (gcc version 4.1.2 (ADI svn)) #121 Fri Aug 14 13:38:44 GMT 209

bootconsole [early_shadow0] enabled

bootconsole [early_shadow0] enabled

bootconsole [early_BFuart0] enabled

bootconsole [early_BFuart0] enabled

early printk enabled on early_BFuart0

early printk enabled on early_BFuart0

Board Memory: 64MB

Board Memory: 64MB

Kernel Managed Memory: 64MB

Kernel Managed Memory: 64MB

Memory map:

Memory map:

  fixedcode = 0x00000400-0x00000490

  fixedcode = 0x00000400-0x00000490

  text      = 0x00001000-0x00135c80

  text      = 0x00001000-0x00135c80

  rodata    = 0x00135c80-0x0019a994

  rodata    = 0x00135c80-0x0019a994

  bss       = 0x0019b000-0x001ac180

  bss       = 0x0019b000-0x001ac180

  data      = 0x001ac180-0x001c2000

  data      = 0x001ac180-0x001c2000

    stack   = 0x001c0000-0x001c2000

    stack   = 0x001c0000-0x001c2000

  init      = 0x001c2000-0x00f53000

  init      = 0x001c2000-0x00f53000

  available = 0x00f53000-0x03eff000

  available = 0x00f53000-0x03eff000

  DMA Zone  = 0x03f00000-0x04000000

  DMA Zone  = 0x03f00000-0x04000000

Hardware Trace Active and Enabled

Hardware Trace Active and Enabled

Boot Mode: 1

Boot Mode: 1

Reset caused by Software reset

Reset caused by Software reset

Blackfin support (C) 2004-2009 Analog Devices, Inc.

Blackfin support (C) 2004-2009 Analog Devices, Inc.

Compiled for ADSP-BF527 Rev 0.2

Compiled for ADSP-BF527 Rev 0.2

Blackfin Linux support by http://blackfin.uclinux.org/

Blackfin Linux support by http://blackfin.uclinux.org/

Processor Speed: 525 MHz core clock and 131 MHz System Clock

Processor Speed: 525 MHz core clock and 131 MHz System Clock

NOMPU: setting up cplb tables

NOMPU: setting up cplb tables

Instruction Cache Enabled for CPU0

Instruction Cache Enabled for CPU0

Data Cache Enabled for CPU0 (write-back)

Data Cache Enabled for CPU0 (write-back)

Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 16001

Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 16001

Kernel command line: root=/dev/mtdblock0 rw clkin_hz=25000000 earlyprintk=serial,uart1,57600 console=tty0 console=ttyBF0,57600 if

Kernel command line: root=/dev/mtdblock0 rw clkin_hz=25000000 earlyprintk=serial,uart1,57600 console=tty0 console=ttyBF0,57600 if

Configuring Blackfin Priority Driven Interrupts

Configuring Blackfin Priority Driven Interrupts

PID hash table entries: 256 (order: 8, 1024 bytes)

PID hash table entries: 256 (order: 8, 1024 bytes)

console [ttyBF0] enabled, bootconsole disabled

console [ttyBF0] enabled, bootconsole disabled

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory available: 48248k/65536k RAM, (13892k init code, 1235k kernel code, 561k data, 1024k dma, 572k reserved)

Calibrating delay loop... 1046.52 BogoMIPS (lpj=2093056)

Security Framework initialized

Mount-cache hash table entries: 512

Blackfin Scratchpad data SRAM: 4 KB

Blackfin L1 Data A SRAM: 16 KB (15 KB free)

Blackfin L1 Data B SRAM: 16 KB (16 KB free)

Blackfin L1 Instruction SRAM: 48 KB (42 KB free)

net_namespace: 288 bytes

NET: Registered protocol family 16

Blackfin DMA Controller

ezkit_init(): registering device resources

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

musb_hdrc: version 6.0, pio, host, debug=0

musb_hdrc: USB Host mode controller at ffc03800 using PIO, IRQ 59

musb_hdrc musb_hdrc.0: MUSB HDRC host driver

musb_hdrc musb_hdrc.0: new USB bus registered, assigned bus number 1

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

NET: Registered protocol family 1

msgmni has been set to 94

io scheduler noop registered

io scheduler anticipatory registered (default)

io scheduler cfq registered

bfin-otp: initialized

Serial: Blackfin serial driver

bfin-uart.1: ttyBF0 at MMIO 0xffc02000 (irq = 31) is a BFIN-UART

brd: module loaded

bfin_mii_bus: probed

bfin_mac: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:01, irq=-1, mdc_clk=2500000Hz(mdc_div=25)@sclk=131MHz)

bfin_mac bfin_mac.0: Blackfin on-chip Ethernet MAC driver, Version 1.1

Driver 'sd' needs updating - please use bus_type methods

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

mice: PS/2 mouse device common for all mice

rtc-bfin rtc-bfin: rtc core: registered rtc-bfin as rtc0

bfin-wdt: initialized: timeout=20 sec (nowayout=0)

usbcore: registered new interface driver usbhid

usbhid: v2.6:USB HID core driver

TCP cubic registered

NET: Registered protocol family 17

rtc-bfin rtc-bfin: setting system clock to 1970-01-05 10:03:11 UTC (381791)

IP-Config: Complete:

     device=eth0, addr=10.100.4.50, mask=255.255.255.0, gw=10.100.4.174,

     host=bf527-ezkit, domain=, nis-domain=(none),

     bootserver=10.100.4.174, rootserver=10.100.4.174, rootpath=

Freeing unused kernel memory: 13892k freed

dma_alloc_init: dma_page @ 0x00f4f000 - 256 pages at 0x03f00000

usb 1-1: new low speed USB device using musb_hdrc and address 2

usb 1-1: configuration #1 chosen from 1 choice

input: HID 413c:3010 as /devices/platform/musb_hdrc.0/usb1/1-1/1-1:1.0/input/input0

generic-usb 0003:413C:3010.0001: input: USB HID v1.00 Mouse [HID 413c:3010] on usb-musb_hdrc.0-1/input0

PHY: 0:01 - Link is Up - 100/Full

                           _____________________________________

        a8888b.           / Welcome to the uClinux distribution \

       d888888b.         /       _     _                         \

       8P"YP"Y88        /       | |   |_|            __  __ (TM)  |

       8|o||o|88  _____/        | |    _ ____  _   _ \ \/ /       |

       8'    .88       \        | |   | |  _ \| | | | \  /        |

       8`._.' Y8.       \       | |__ | | | | | |_| | /  \        |

      d/      `8b.       \      \____||_|_| |_|\____|/_/\_\       |

     dP   .    Y8b.       \   For embedded processors including   |

    d8:'  "  `::88b        \    the Analog Devices Blackfin      /

   d8"         'Y88b        \___________________________________/

  :8P    '      :888

   8a.   :     _a88P         For further information, check out:

._/"Yaa_:   .| 88P|            - http://blackfin.uclinux.org/

\    YP"    `| 8P  `.          - http://docs.blackfin.uclinux.org/

/     \.___.d|    .'           - http://www.uclinux.org/

`--..__)8888P`._.'  jgs/a:f    - http://www.analog.com/blackfin

 

Have a lot of fun...

 

 

BusyBox v1.13.4 (2009-08-14 11:59:44 GMT) built-in shell (msh)

Enter 'help' for a list of built-in commands.

 

root:/>

root:/> modprobe bfin-t350mcqb-fb

bfin-t350mcqb: 320x240 24-bit RGB FrameBuffer initializing...

root:/> mkdir media

root:/> mv picts/ media/

root:/> cd media/picts/

root:/media/picts> ls

518oZl8ckYL._SS500_.jpg

51AEQMHTB6L._SL500_BO2,204,203,200_PIlitb-dp-500-arrow,TopRight,45,-64_OU01_AA240_SH20_.jpg

51GnayRkl2L._SS500_.jpg

51MWeGhM4TL._SL500_BO2,204,203,200_PIsitb-dp-500-arrow,TopRight,45,-64_OU01_AA240_SH20_.jpg

51ggk68gnRL._SL500_BO2,204,203,200_PIsitb-dp-500-arrow,TopRight,45,-64_OU01_AA240_SH20_.jpg

51piHVL7LML._SS500_.jpg

51s3KVMbdYL._SS500_.jpg

51yg2wU0NBL._SS500_.jpg

ref=sib_dp_pt

root:/media/picts> pictureflow -qws

(No picture shows up on lcd screen)

--

 

Follow-ups

 

--- Sonic Zhang                                              2009-08-17 00:37:20

Not a bug. I can run see the picture on bf548-ezkit.

 

--- Vivi Li                                                  2009-08-20 05:24:02

It can work for fdpic mode on bf527-ezkit, but still fails for flat mode.

 

--- Vivi Li                                                  2009-08-21 00:36:39

548-ezkit:

fdpic: fail, nothing shows up

flat:  fail, nothing shows up

 

527-ezkit:

fdpic: ok

flat:  fail, nothing shows up

 

537-stamp:

fdpic: ok but out of memory

flat:  fail, nothing shows up

 

--- Barry Song                                               2009-12-22 22:59:16

For fdpic, if there are many pictures, running pictureflow at the first time,

memory can be exhausted and get pages will fail.

For flat, jpeg doesn't work. bmp and png can work. And same problems can happen

for memory alloc if there are too many pictures.

 

--- Barry Song                                               2009-12-22 23:03:01

memory outage for many pictures:

root:/media/picts> pictureflow -qws

pictureflow: page allocation failure. order:8, mode:0x40d0

Hardware Trace:

   0 Target : <0x00004bcc> { _dump_stack + 0x0 }

     Source : <0x00030480> { ___alloc_pages_internal + 0x1b4 } CALL

pcrel

   1 Target : <0x00030480> { ___alloc_pages_internal + 0x1b4 }

     Source : <0x0000f112> { _printk + 0x16 } RTS

   2 Target : <0x0000f10e> { _printk + 0x12 }

     Source : <0x0000f9b2> { _vprintk + 0x132 } RTS

   3 Target : <0x0000f9a6> { _vprintk + 0x126 }

     Source : <0xffa00be0> { __common_int_entry + 0xcc }

   4 Target : <0xffa00b7e> { __common_int_entry + 0x6a }

     Source : <0xffa009d0> { _return_from_int + 0x58 }

   5 Target : <0xffa009d0> { _return_from_int + 0x58 }

     Source : <0xffa009a6> { _return_from_int + 0x2e }

   6 Target : <0xffa00978> { _return_from_int + 0x0 }

     Source : <0xffa00b7a> { __common_int_entry + 0x66 }

   7 Target : <0xffa00b78> { __common_int_entry + 0x64 }

     Source : <0xffa0030a> { _asm_do_IRQ + 0x62 }

   8 Target : <0xffa00302> { _asm_do_IRQ + 0x5a }

     Source : <0x00012f70> { __local_bh_enable + 0x40 } RTS

   9 Target : <0x00012f30> { __local_bh_enable + 0x0 }

     Source : <0x00013058> { ___do_softirq + 0x9c } JUMP.L

  10 Target : <0x00013050> { ___do_softirq + 0x94 }

     Source : <0x00013034> { ___do_softirq + 0x78 } IF !CC JUMP

  11 Target : <0x00013016> { ___do_softirq + 0x5a }

     Source : <0x0001610e> { _run_timer_softirq + 0x82 } RTS

  12 Target : <0x000160a0> { _run_timer_softirq + 0x14 }

     Source : <0x00021290> { _hrtimer_run_pending + 0x84 } RTS

  13 Target : <0x00021284> { _hrtimer_run_pending + 0x78 }

     Source : <0x00021232> { _hrtimer_run_pending + 0x26 } IF !CC JUMP

  14 Target : <0x0002120c> { _hrtimer_run_pending + 0x0 }

     Source : <0x0001609c> { _run_timer_softirq + 0x10 } CALL pcrel

  15 Target : <0x0001608c> { _run_timer_softirq + 0x0 }

     Source : <0x00013014> { ___do_softirq + 0x58 } CALL (P2)

Stack info:

SP: [0x024f9df8] <0x024f9df8> /* kernel dynamic memory */

FP: (0x024f9df4)

Memory from 0x024f9df0 to 024fa000

024f9df0: 024f9df8 (00000000)[00030458]<00030484> 03d84600  00000000

000240d0  03d847e8

024f9e10: 00000008  000040d0  00000001  00000048  024f8000  024f8000  00000000

000240d0

024f9e30: 024f8000  00000010  00000000  00000000  00000000  00000000  00560680

<000305ae>

024f9e50: 00000000  000f5000  000f5000  00000004  04000021  00000000  00000003

<00037b40>

024f9e70: 00000000  00000004  00000000 <00037d58> 4b3075b5  00000000

00000000  04000021

024f9e90: 00000000  00000000  00000000  00000073  00000000  005616a0  00000001

00001000

024f9eb0: 00001000  0267f294 <000038fc> 00000000  000f5000  024f1940

024f8000  04000021

024f9ed0: 00000000  00000003  00001000  00000001  1ab3f000  00000003  04000021

00000000

024f9ef0: ffa00844  000038b4  000000c0  00000000  ffffe000  00000000  00000000

026c80c8

024f9f10: 023f2850  00000001  04000021  00000000  00000000  0178d46a  00008000

00002000

024f9f30: 00000000  024fa000  0178d46a  0178d46a <017af394> ffa00ecc

02003025  017c70d7

024f9f50: 0179f7cf  017c70ac  0179f7ce  00000000  00000000  00000000  00000000

00000000

024f9f70: 00000000  005a0230  005a06c8  005a0ac8  00443378  00000000  00000000

00000000

024f9f90: 00000000  00000000  016b9bdf  ffffadfd  00000008  00441ba8  00000090

00000490

024f9fb0: 00000000 <0267f288> 0267f294  00000000  024f1940  024f1940

04000021  00000000

024f9fd0: 000000c0  024f15b8  002ba208  00000000  00000000  04000021  00000003

000f5000

024f9ff0: 00000000  00000000  000000c0  00000006

Return addresses in stack:

   frame  1 : <0x00030458> { ___alloc_pages_internal + 0x18c }

    address : <0x00030484> { ___alloc_pages_internal + 0x1b8 }

    address : <0x000305ae> { ___get_free_pages + 0x1e }

    address : <0x00037b40> { _do_mmap_pgoff + 0x3a4 }

    address : <0x00037d58> { _do_mmap_pgoff + 0x5bc }

    address : <0x000038fc> { _sys_mmap2 + 0x48 }

    address : <0x017af394> [ /lib/libc.so.0 + 0x2f394 ]

    address : <0x0267f288> [ pictureflow + 0x1f288 ]

 

--- Barry Song                                               2009-12-23 05:04:08

Not a bug for flat since jpeg is a plugin in qt and we don't support plugin. You

can use png or bmp to replace.

For fdpic, I only saw a memory alloc fail issue. Since you need increase

EXT2_BLOCKS much to pass the compiling for QT. You can de-select EXT2 in kernel

directly.

 

It is possible we can let QT support plugin by things like Q_IMPORT_PLUGIN(),

but it seems we still need to give some patches to QT for blackfin. So I start a

task for this.

 

--- Vivi Li                                                  2010-02-22 04:14:08

FDPIC works if memory is big enough.

Close this bug.

 

 

 

    Files

    Changes

    Commits

    Dependencies

    Duplicates

    Associations

    Tags

 

File Name     File Type     File Size     Posted By

config.qt.flat.user    application/octet-stream    45574    Vivi Li

config.qt.flat    application/octet-stream    39193    Vivi Li

Outcomes