2011-08-02 03:41:45     How to enable RTS/CTS uart flow control on 2010R1

Document created by Aaronwu Employee on Aug 27, 2013
Version 1Show Document
  • View in full screen mode

2011-08-02 03:41:45     How to enable RTS/CTS uart flow control on 2010R1

barreh walid (TUNISIA)

Message: 102777   

 

I have a BF548 ezkit and I am using the latest trunk kernel/uboot/filesystem ( 2010R1 ).

 

How i can enable RTS/CTS flow control  CONFIG_SERIAL_BFIN_CTSRTS ?

QuoteReplyEditDelete

 

 

2011-08-02 04:14:21     Re: How to enable RTS/CTS uart flow control on 2010R1

Sonic Zhang (CHINA)

Message: 102778   

 

under Kconfig menu option of each uart port.

QuoteReplyEditDelete

 

 

2011-08-02 04:32:35     Re: How to enable RTS/CTS uart flow control on 2010R1

barreh walid (TUNISIA)

Message: 102779   

 

THANKS ZHANG.

 

But under Kconfig menu i find only hardware RTSCTS flow control

QuoteReplyEditDelete

 

 

2011-08-02 04:47:13     Re: How to enable RTS/CTS uart flow control on 2010R1

Sonic Zhang (CHINA)

Message: 102780   

 

Only hardware RTS/CTS is supported and tested on bf548 in the bfin serial driver.

QuoteReplyEditDelete

 

 

2011-08-02 04:50:27     Re: How to enable RTS/CTS uart flow control on 2010R1

barreh walid (TUNISIA)

Message: 102781   

 

THANKS ZHANG.

Attachments

    Outcomes