2011-05-27 18:20:30     Strange results

Document created by Aaronwu Employee on Aug 27, 2013
Version 1Show Document
  • View in full screen mode

2011-05-27 18:20:30     Strange results

Jason Child (UNITED STATES)

Message: 100901   

 

Ok, so I thought that my uImage was too large and I paired it down (removed audio and video support as I do not need them).

 

Now, when I tftp my uImage all goes well. I then try to boot the uImage that I loaded and the serial terminal output switches to what looks like a russian character set! does anyone have any idea why this would happen? is this an issue of the baudrate changing? If i close my terminal program downm disconnect my cable from the board, power cycle the board and reconnect the problem goes away...until I try to load an image...and it seems like ANY image...

QuoteReplyEditDelete

 

 

2011-05-27 18:41:50     Re: Strange results

Jason Child (UNITED STATES)

Message: 100902   

 

Wow. Some how my bootargs got all wacky and was not setting the console tty device OR the baudrate. Resetting them in u-boot and restarting my console fixed the problem!

QuoteReplyEditDelete

Attachments

    Outcomes