2010-11-24 07:38:48     error in booting ezkit533 kernel

Document created by Aaronwu Employee on Aug 23, 2013
Version 1Show Document
  • View in full screen mode

2010-11-24 07:38:48     error in booting ezkit533 kernel

Chen Kuantong (CHINA)

Message: 96172   

 

I make my own uclinux kernel for ezkit-533, but cannot bootm it in flash.

 

My host GCC version is 4.1.2    make version is3.8.1.

 

toolchain: bfin-gcc-3.4.05r4-6.i386.rpm  uclinux:uClinux-dist-R05R4-RC2.tar.bz2 .

 

I just do:

 

1.make menuconfig

 

2.make all

 

I get the uImage and then download the image for u-boot using serial.

 

loadb 0x1000000

 

bootm 0x1000000

 

The board prints the information:

 

## Booting image at 01000000 ...

   Image Name:   uClinux Kernel and Filesystem

   Created:      2010-11-24  11:36:09 UTC

   Image Type:   Blackfin Linux Kernel Image (gzip compressed)

   Data Size:    2591083 Bytes =  2.5 MB

   Load Address: 00001000

   Entry Point:  00001000

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

Starting Kernel at = 1000

Linux version 2.6.12.1-BFIN-2005R4 (root@ltb.localdomain) (gcc version 3.4.4 (Bl

ackfin 05R4 20051205)) #6 Wed Nov 24 19:20:46 CST 2010

Blackfin support (C) 2004 Analog Devices, Inc.

ADSP-BF533 Rev. 0.2

uClinux/BF533

Blackfin uClinux support by blackfin.uclinux.org

Processor Speed: 594 MHz core clock and 118 Mhz System Clock

Board Memory: 32MB

Memory map:

  text = 0x001000-0x100e60

  data = 0x10eeb8-0x140eac

  bss  = 0x140eb0-0x14ebcc

  rootfs = 0x1700000-0x1f00000

  stack = 0x110000-0x112000

Instruction Cache Enabled

4>Ha<5>Linux version 2.6.12.1-BFIN-2005R4 (root@ltb.localdomain) (gcc version 3.

4.4 (Blackfin 05R4 20051205)) #6 Wed Nov 24 19:20:46 CST 2010

Blackfin support (C) 2004 Analog Devices, Inc.

ADSP-BF533 Rev. 0.2

uClinux/BF533

Blackfin uClinux support by blackfin.uclinux.org

Processor Speed: 594 MHz core clock and 118 Mhz System Clock

Board Memory: 32MB

Memory map:

  text = 0x001000-0x100e60

  data = 0x10eeb8-0x140eac

  bss  = 0x140eb0-0x14ebcc

  rootfs = 0x1700000-0x1f00000

  stack = 0x110000-0x112000

Instruction Cache Enabled

Data Cache Enabled (write-through)

Hardware Trace Enabled

Built 1 zonelists

Kernel command line:

Configuring Blackfin Priority Driven Interrupts

PID hash table entries: 128 (order: 7, 2048 bytes)

Linux version 2.6.12.1-BFIN-2005R4 (root@ltb.localdomain) (gcc version 3.4.4 (Bl

ackfin 05R4 20051205)) #6 Wed Nov 24 19:20:46 CST 2010

Blackfin support (C) 2004 Analog Devices, Inc.

ADSP-BF533 Rev. 0.2

uClinux/BF533

Blackfin uClinux support by blackfin.uclinux.org

Processor Speed: 594 MHz core clock and 118 Mhz System Clock

Board Memory: 32MB

Memory map:

  text = 0x001000-0x100e60

  data = 0x10eeb8-0x140eac

  bss  = 0x140eb0-0x14ebcc

  rootfs = 0x1700000-0x1f00000

  stack = 0x110000-0x112000

Instruction Cache Enabled

Data Cache Enabled (write-through)

Hardware Trace Enabled

Built 1 zonelists

Kernel command line:

Configuring Blackfin Priority Driven Interrupts

PID hash table entries: 128 (order: 7, 2048 bytes)

Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)

Linux ver 2.6.12.1-BFIN-2005R4 (root@ltb.localdomain) (gcc version 3.4.4 (Blackf

in 05R4 20051205)) #6 Wed Nov 24 19:20:46 CST 2010

Blackfin support (C) 2004 Analog Devices, Inc.

ADSP-BF533 Rev. 0.2

uClinux/BF533

Blackfin uClinux support by blackfin.uclinux.org

Processor Speed: 594 MHz core clock and 118 Mhz System Clock

Board Memory: 32MB

Memory map:

  text = 0x001000-0x100e60

  data = 0x10eeb8-0x140eac

  bss  = 0x140eb0-0x14ebcc

  rootfs = 0x1700000-0x1f00000

  stack = 0x110000-0x112000

Instruction Cache Enabled

Data Cache Enabled (write-through)

Hardware Trace Enabled

Built 1 zonelists

Kernel command line:

Configuring Blackfin Priority Driven Interrupts

PID hash table entries: 128 (order: 7, 2048 bytes)

Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)

Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)

DCPLB_FAULT_ADDR=0cc6e38c

ICPLB_FAULT_ADDR=0002b52c

Stack from 00114c04:<0>

       <0> 00000000<0> 0000275c<0> 00000000<0> 0002b52c<0> 00000001<0> 00006726<

0> 000026e4<0> 00000000<0>

       <0> 00111dc8<0> 00000006<0> 00006ac4<0> ffffffe0<0> 0000001f<0> ffffffff<

0> 00000001<0> 0000c026<0>

       <0> 00000041<0> 0000b6c6<0> 0000b6c6<0> 0000c026<0> 00000000<0> 00111d10<

0> 0002b52c<0> 0000b6c6<0>

       <0> 000120fa<0> 000026e4<0> 00000041<0> 00063006<0> 00061250<0> 00063006<

0> 00061250<0> 00000000<0>

       <0> 00000000<0> 00000000<0> 00000000<0> 00000000<0> 00000000<0> 00000000<

0> 00000000<0> 00000000<0>

       <0> ffffffff<0> 00000000<0> 00000000<0> 00000000<0> 00000000<0> 00000000<

0> 00000000<0> 00000000<0>

Call Trace:<0>

       <0> [<000026e4>]<0> [<000026e4>]<0> [<000026e4>]<0> [<000026e4>]<0>

       <0> [<00004b31>]<0> [<00004b34>]<0> [<00004d31>]<0> [<00004d34>]<0>

       <0> [<00001000>]<0> [<00100000>]<0> [<0000ffe0>]<0> [<00008400>]<0>

       <0> [<0000845c>]<0> [<00008478>]<0> [<00008400>]<0> [<00008404>]<0>

       <0> [<00008430>]<0> [<000e68d0>]<0> [<000e68e4>]<0> [<000e6990>]<0>

       <0> [<000e6994>]<0> [<000ee804>]<0> [<000ecc60>]<0> [<000e6b04>]<0>

       <0> [<000e6998>]<0> [<000e699c>]<0> [<000e6b08>]<0> [<0000b1b4>]<0>

       <0> [<00004000>]<0> [<00001388>]<0> [<0000c428>]<0> [<0000c4c8>]<0>

Kernel panic - not syncing: No CPLB Address Match

 

It seems that the kernel has been started more than once,and at last brokes down.

QuoteReplyEditDelete

 

 

2010-11-24 16:11:35     Re: error in booting ezkit533 kernel

Mike Frysinger (UNITED STATES)

Message: 96184   

 

your processor is too old (bf533-0.2).  get a board with a newer silicon rev.

Attachments

    Outcomes