2009-11-23 16:26:13     bf527 ez-kit and av ez-extender

Document created by Aaronwu Employee on Aug 19, 2013
Version 1Show Document
  • View in full screen mode

2009-11-23 16:26:13     bf527 ez-kit and av ez-extender

Steve ten Pas (UNITED STATES)

Message: 82668   

 

Where can I get information on the proper jumper settings on the av ez-extender board when using it with the bf527 ez-kit?  I also need to know how to setup uClinux for using these two boards together.

 

 

 

Thanks,

 

Steve

QuoteReplyEditDelete

 

 

2009-11-23 16:32:46     Re: bf527 ez-kit and av ez-extender

Mike Frysinger (UNITED STATES)

Message: 82669   

 

the AV-EZ-Extender card is not currently supported with Linux drivers.  you might be able to find some drivers by searching the forums and seeing what other people have posted.

 

if you want to know how to hook it up to different boards, review the manuals on analog.com.  or post questions to the dsp board at   ez.analog.com/

QuoteReplyEditDelete

 

 

2009-11-24 11:16:50     Re: bf527 ez-kit and av ez-extender

Robin Getz (UNITED STATES)

Message: 82706   

 

Mike:

 

I thought that the AD1836 should be supported with the existing driver - shouldn't it? It is just the video parts (ADV7179 & ADV7183B) that have no drivers (that I'm aware of).

 

-Robin

QuoteReplyEditDelete

 

 

2009-11-24 11:59:26     Re: bf527 ez-kit and av ez-extender

Mike Frysinger (UNITED STATES)

Message: 82712   

 

i was referring to the video parts as that is why people get this card in the first place.  the bf527-ezkit already has audio on it.

Attachments

    Outcomes