2009-10-07 01:56:41     TWI Issues in uclinux

Document created by Aaronwu Employee on Aug 19, 2013
Version 1Show Document
  • View in full screen mode

2009-10-07 01:56:41     TWI Issues in uclinux

suresh kumar (INDIA)

Message: 80922   

 

Hi

 

I am working Video encoder adv7393.For configuration i am using TWI interface.

 

But the problem is i enabled      " <M> Blackfin TWI I2C  support "  in I2C Hardware Bus support  as module.After kernel booting i am giving modprobe for "i2c-bfin-twi.ko" in uclinux kernel.i install TWI sucessfully as module but I2C-0 node is not created in /dev directory.

 

 

 

What might be the problem.

 

 

 

Thanks

 

Sureshkumar

 

ADI-DSP Learning center.

QuoteReplyEditDelete

 

 

2009-10-07 02:06:52     Re: TWI Issues in uclinux

Mike Frysinger (UNITED STATES)

Message: 80924   

 

a bus master driver is not the userspace device driver.  if you want the i2c /dev interface, then enable the driver for it.

 

I2C_CHARDEV -> I2C device interface

Attachments

    Outcomes