2009-07-19 22:40:15     how to stop loading uImage

Document created by Aaronwu Employee on Aug 16, 2013
Version 1Show Document
  • View in full screen mode

2009-07-19 22:40:15     how to stop loading uImage

chandu v (MALAYSIA)

Message: 77671   

 

Hi ,

 

am loading uImage .537.ast to my BF537-Stamp via TFTP.

 

while doing this am getting rety count exceeded, Error.

 

so i need ot change the serverip address, but i dont knwo how to stop it, i tried by giving ctrl+c

 

it's not working,

 

pls help me how to stop it and change the serverip address, and ip address of my stamp.

 

 

 

Regards

 

chandu

QuoteReplyEditDelete

 

 

2009-07-19 22:45:10     Re: how to stop loading uImage

Mike Frysinger (UNITED STATES)

Message: 77672   

 

older versions of u-boot did not respond to ctrl+c when using the network.  newer versions fix this.

QuoteReplyEditDelete

 

 

2009-07-19 23:16:16     Re: how to stop loading uImage

chandu v (MALAYSIA)

Message: 77673   

 

Hi Mike,

 

previously ctrl+c  worked for me, i didn't changed my u-boot version.

 

few days back i was able to laod the uImage.537.ast via tftp.

 

suddenly i dont knwo what hapend to board.

 

here is my U-boot version and stamp version.

 

U-Boot 1.1.6-svn (ADI-2007R1) (Oct  4 2007 - 12:42:05)

 

CPU:   ADSP BF537 Rev.: 0.3

 

 

pls help me how to fix it

 

Regards

 

Chandu

QuoteReplyEditDelete

 

 

2009-07-19 23:38:26     Re: how to stop loading uImage

Mike Frysinger (UNITED STATES)

Message: 77674   

 

there is no fix other than upgrade.  it isnt really a big deal anyways -- simply hit the reset button and dont let it start the tftp operation.

Attachments

    Outcomes