2009-07-13 12:27:47     LCD HD44780 based driver on BF-533 Stamp

Document created by Aaronwu Employee on Aug 16, 2013
Version 1Show Document
  • View in full screen mode

2009-07-13 12:27:47     LCD HD44780 based driver on BF-533 Stamp

Lukasz Jaruszewski (POLAND)

Message: 77141   

 

Hi all,

 

I want to run LCD with HD44780 based driver on my BF-533 Stamp.

 

I went through the docs section and I found a web site   docs.blackfin.uclinux.org/doku.php?id=blackfin_twi_lcd_hd44780_based_driver . However I haven't twi_ad_card which is shows in the picture on the top.

 

Do I have to have this one, to be able to run my LCD display? Is there any other way to connect LCD with included TWI/I2C LCD driver without twi_ad_card? Is it does, how must I connect  wires between LCD and I2C pins on Stamp? I guess, firstly I have to choose the generic GPIO based I2C driver in the kernel configuration menu from followig section   docs.blackfin.uclinux.org/doku.php?id=i2c .

 

I'll grateful for any suggestions and pieces of advice.

 

Lukasz

QuoteReplyEditDelete

 

 

2009-07-14 00:33:44     Re: LCD HD44780 based driver on BF-533 Stamp

Mike Frysinger (UNITED STATES)

Message: 77155   

 

the schematics for the card are posted:

  blackfin.uclinux.org/gf/project/stamp/frs

QuoteReplyEditDelete

Attachments

    Outcomes