2009-03-12 02:18:48     how to change my current file system into read-and-write file system like jffs2

Document created by Aaronwu Employee on Aug 14, 2013
Version 1Show Document
  • View in full screen mode

2009-03-12 02:18:48     how to change my current file system into read-and-write file system like jffs2

gladys liu (AFGHANISTAN)

Message: 70816   

 

hi

 

i'm using the uclinux-dist-2008R1.5-RC3 to develop the system

 

i found that the current file system is read only .

 

how could i change it into read-and-write system such as jffs2

 

by the way , i'm loading my kernel and file system on the parallel flash on the bf527-ezkit.

 

 

QuoteReplyEditDelete

 

 

2009-03-12 02:25:29     Re: how to change my current file system into read-and-write file system like jffs2

Mike Frysinger (UNITED STATES)

Message: 70819   

 

if you want to know how to use jffs2 as a root filesystem, then read the docs for jffs2:

docs.blackfin.uclinux.org/doku.php?id=linux-kernel:jffs

QuoteReplyEditDelete

 

 

2009-03-12 02:34:50     Re: how to change my current file system into read-and-write file system like jffs2

gladys liu (AFGHANISTAN)

Message: 70821   

 

thanks

 

i'll read that and try .

Attachments

    Outcomes