2008-08-06 23:18:25     How to make the program compiled by VDSP as format .dxe run in uCLINUX system?

Document created by Aaronwu Employee on Aug 7, 2013
Version 1Show Document
  • View in full screen mode

2008-08-06 23:18:25     How to make the program compiled by VDSP as format .dxe run in uCLINUX system?

david pan (CHINA)

Message: 60062   

 

 

How to make the program compiled by VDSP as format .dxe run out in uCLINUX system?

 

 

 

 

 

 

Please see to the system’s structure shown above. We use Blackfin-5xx to do research and develop our products, and try to take advantages of uClinux and Visual DSP++ development tools, i.e, we run OS such as uClinux for system’s management and optimize our programs by Visual DSP++. But how can we manage uClinux to call the programs optimized by Visual DSP++? If we load those optimized programs at the address of 0x20400000, between the ending of u-boot and the starting of uClinux, run in uClinux, then how those programs compiled by Visual DSP++ could be successfully performed? For the uClinux didn’t support the .dxe programs in the .elf format, we wonder to know if there is any good idea to settle this problem occurred by incompatible formats. Thank you!

QuoteReplyEditDelete

 

 

2008-08-06 23:40:20     Re: How to make the program compiled by VDSP as format .dxe run in uCLINUX system?

Yi Li (CHINA)

Message: 60064   

 

Sorry, we don't support running VDSP binary on uclinux.

 

Please read: http://docs.blackfin.uclinux.org/doku.php?id=visualdsp:faq

Attachments

    Outcomes