2008-09-14 15:30:47     make u-boot-1.1.6-2008R1.5 erroe

Document created by Aaronwu Employee on Aug 7, 2013
Version 1Show Document
  • View in full screen mode

2008-09-14 15:30:47     make u-boot-1.1.6-2008R1.5 erroe

Jingwei Cheng (CHINA)

Message: 62135   

 

bfin-uclinux-objcopy --gap-fill=0xff -O srec u-boot u-boot.srec

bfin-uclinux-objcopy --gap-fill=0xff -O ihex u-boot u-boot.hex

bfin-uclinux-objcopy --gap-fill=0xff -O binary u-boot u-boot.bin

./tools/envcrc --binary > env-ldr.o

bfin-uclinux-ldr -T bf548-0.0 -f -c u-boot.ldr u-boot --bmode para --use-vmas --initcode cpu/blackfin/initcode.o --punchit ):):env-ldr.o --dma 6

/bin/sh: -c: line 1: syntax error near unexpected token `)'

/bin/sh: -c: line 1: `bfin-uclinux-ldr -T bf548-0.0 -f -c u-boot.ldr u-boot --bmode para --use-vmas --initcode

cpu/blackfin/initcode.o --punchit ):):env-ldr.o --dma 6'

make: *** [u-boot.ldr] Error 2

[root@localhost u-boot-1.1.6-2008R1.5]#

 

 

What problems?Thank you!!!

TranslateQuoteReplyEditDelete

 

 

2008-09-14 16:02:51     Re: make u-boot-1.1.6-2008R1.5 erroe

Mike Frysinger (UNITED STATES)

Message: 62136   

 

check your board configuration file ... you're probably not declaring the environment options correctly

QuoteReplyEditDelete

 

 

2008-09-15 02:31:09     Re: make u-boot-1.1.6-2008R1.5 erroe

Jingwei Cheng (CHINA)

Message: 62147   

 

[root@localhost u-boot-1.1.6-2008R1.5]# make bf548-ezkit-config

 

Configuring for bf548-ezkit board...

 

 

 

if choose BFIN_BOOT_PARA mode,appear error.

 

if choose BFIN_BOOT_BYPASS mode,succeed.

 

 

 

why??

TranslateQuoteReplyEditDelete

 

 

2008-09-15 02:36:13     Re: make u-boot-1.1.6-2008R1.5 erroe

Mike Frysinger (UNITED STATES)

Message: 62148   

 

because your board config is wrong ... read it and the tangled #if logic you have in it

 

BYPASS boot mode is not valid for BF54x processors anyways

Attachments

    Outcomes