2008-06-20 05:04:01     What all files I need to change to configure PHY( Micrel KSZ8893MQL/MQLI) on a new board.

Document created by Aaronwu Employee on Aug 6, 2013
Version 1Show Document
  • View in full screen mode

2008-06-20 05:04:01     What all files I need to change to configure PHY( Micrel KSZ8893MQL/MQLI) on a new board.

Venkat Reddy (INDIA)

Message: 57618   

 

Hi All,

 

We have made a board with BF527 processor, on this board we used Micrel KSZ8893MQL/MQLI PHY chip. Can anyone help me that what all files I need change to configure this PHY chip.

 

Thank you.

 

Venkat.

QuoteReplyEditDelete

 

 

2008-06-20 05:17:40     Re: What all files I need to change to configure PHY( Micrel KSZ8893MQL/MQLI) on a new board.

Mike Frysinger (UNITED STATES)

Message: 57621   

 

in the kernel, just go into the network device driver section and into the PHY sub menu.  if an appropriate driver is listed for your PHY, select it ... if there isnt, you'll have to develop your own phylib driver for it.

Attachments

    Outcomes