2008-05-23 04:11:45     Test linphone failure

Document created by Aaronwu Employee on Aug 6, 2013
Version 1Show Document
  • View in full screen mode

2008-05-23 04:11:45     Test linphone failure

Bing Han (CHINA)

Message: 56174   

 

Now my audio codec WM8731 can work   successfully in my bf561 system .i can make a talkthrough use the command 

 

vrec -S | vplay. but now i test linphone which is in the uclinux_2008R1-RC8 ,i meet error .

 

the ip of my bf561 sysytem is 192.168.1.105,  my host pc is 192.168.1.107. my host pc has  SJphone1.65(which is sip-terminal).

 

when i call host pc  from my bf561 sysytem ,  they  can establish the connect , but my bf561 sysytem only  unilateralism, it make record and can not play the sound , from the pc you can hear some  noise tootle .below is debug informations:

 

 

 

linphonec> call sip:192.168.1.107

Contacting sip:192.168.1.107

linphonec> DEBUG: [get_output_if] connect: Network is unreachable

ortp-error-Could not find default routable ip address !

DEBUG: [get_output_if] connect: Network is unreachable

DEBUG: [get_output_if] connect: Network is unreachable

DEBUG: [get_output_if] connect: Network is unreachable

ortp-error-Could not find default routable ip address !

linphonec> runninig in soc_pcm_open start

sport-i2s: bf5xx_i2s_startup : sport 0

Running in bf5xx_pcm_open

bfin-wm8731: bf5xx_wm8731_startup

runninig in soc_pcm_open end

bfin-wm8731:

bf5xx_wm8731_hw_params rate 8000 format 2

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_1 0

sport-i2s: bf5xx_i2s_set_dai_fmt : fmt:  0

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt 0

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt_1: tcr1 4400 tcr2 200

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt_5: tcr1 4400

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt 0

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt_1: rcr1 4400 rcr2 200

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt_5: rcr1 4400

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_2 0

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_3 0

sport-i2s: bf5xx_i2s_tx_hw_params : sport 0

sport-i2s: bf5xx_i2s_tx_hw_params : tcr2 0x200

sport-i2s: bf5xx_i2s_tx_hw_params : tcr2 0x20f

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x3000

bf5xx-sport: sport_config_tx_dma x_count:0x1800, y_count:0x0

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=1800,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

Coruected.nning in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

 

linphonec> sport-i2s: bf5xx_i2s_shutdown

running in bf5xx_pcm_close

DEBUG: [get_output_if] connect: Network is unreachable

ortp-error-Could not find default routable ip address !

DEBUG: [get_output_if] connect: Network is unreachable

runninig in soc_pcm_open start

sport-i2s: bf5xx_i2s_startup : sport 0

Running in bf5xx_pcm_open

bfin-wm8731: bf5xx_wm8731_startup

runninig in soc_pcm_open end

bfin-wm8731:

bf5xx_wm8731_hw_params rate 8000 format 2

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_1 0

sport-i2s: bf5xx_i2s_set_dai_fmt : fmt:  0

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt 0

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt_1: tcr1 4400 tcr2 200

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt_5: tcr1 4400

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt 0

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt_1: rcr1 4400 rcr2 200

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt_5: rcr1 4400

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_2 0

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_3 0

sport-i2s: bf5xx_i2s_rx_hw_params : sport 0

sport-i2s: bf5xx_i2s_rx_hw_params : tcr2 0x200

sport-i2s: bf5xx_i2s_rx_hw_params : tcr2 0x20f

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_rx_dma buf:03f5a000, frag:8, fragsize:0x3000

bf5xx-sport: sport_config_rx_dma(x_count:0x1800, y_count:0x0)

bf5xx-sport: setup_desc: setup desc: desc0=03f72000, next0=3f72012, desc1=03f72012,next1=3f72024

x_count=1800,y_count=0,addr=0x3f5a000,cfs=0x7987

running in bf5xx_pcm_trigger

bf5xx-sport: sport_rx_start: tx_run:0, rx_run:0

 

running in sport_tx_dma_start

running in sport_rx_dma_start

running in bf5xx_pcm_trigger Rx start

pcm trigger 1111111111

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

bf5xx-sport: rx_handler enter

 

 

 

when  i call the bf561 sysytem from host pc ,they can not establish connenct .the bf561 system can not answer the call(from pc host).  below is debug informations:

 

linphonec>

linphonec> DEBUG: [get_output_if] connect: Network is unreachable

DEBUG: [get_output_if] connect: Network is unreachable

ortp-error-Could not find default routable ip address !

DEBUG: [get_output_if] connect: Network is unreachable

ortp-error-Could not find default routable ip address !

"unknown" <sip:192.168.1.107> is contacting you.

linphonec> DEBUG: [get_output_if] connect: Network is unreachable

runninig in soc_pcm_open start

sport-i2s: bf5xx_i2s_startup : sport 0

Running in bf5xx_pcm_open

bfin-wm8731: bf5xx_wm8731_startup

runninig in soc_pcm_open end

bfin-wm8731:

bf5xx_wm8731_hw_params rate 44100 format 2

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_1 0

sport-i2s: bf5xx_i2s_set_dai_fmt : fmt:  0

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt 0

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt_1: tcr1 4400 tcr2 200

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt_5: tcr1 4400

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt 0

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt_1: rcr1 4400 rcr2 200

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt_5: rcr1 4400

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_2 0

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_3 0

sport-i2s: bf5xx_i2s_tx_hw_params : sport 0

sport-i2s: bf5xx_i2s_tx_hw_params : tcr2 0x200

sport-i2s: bf5xx_i2s_tx_hw_params : tcr2 0x20f

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: err_handler

sport status error: TUVF

 

running in sport_tx_dma_start

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

 

 

 

where is wrong , the linphone is OK? perhaps the wrong is in my audio driver, where ?? thanks?

TranslateQuoteReplyEditDelete

 

 

2008-05-23 04:26:55     Re: Test linphone failure

Mike Frysinger (UNITED STATES)

Message: 56200   

 

your host most likely has mutliple IPs and routes.  this currently screws up linphone.  you should test on systems that only have one active interface.

QuoteReplyEditDelete

 

 

2008-05-23 05:08:06     回复: Re: Test linphone failure

Bing Han (CHINA)

Message: 56201   

 

thank you for your reply , i will try   。

 

do you think my audio driver is ok?

TranslateQuoteReplyEditDelete

 

 

2008-05-23 07:17:57     回复: Re: Test linphone failure

Bing Han (CHINA)

Message: 56204   

 

thanks !

 

aftert  configure the board-ip netmask-ip gateway-ip , I initiate a call from  board to telephone , after type "answer" in

telephone ,linphonec work well . but I initiate a call from  telephone  to board, linphonec can not give me time to type "answer" in linphonec,   the program to configure audio codec without  stop! where is error?

 

error information:

 

linphonec> "unknown" <sip:192.168.0.105> is contacting you.

linphonec> runninig in soc_pcm_open start

sport-i2s: bf5xx_i2s_startup : sport 0

Running in bf5xx_pcm_open

bfin-wm8731: bf5xx_wm8731_startup

runninig in soc_pcm_open end

bfin-wm8731:

bf5xx_wm8731_hw_params rate 44100 format 2

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_1 0

sport-i2s: bf5xx_i2s_set_dai_fmt : fmt:  0

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt 0

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt_1: tcr1 4400 tcr2 200

sport-i2s: bf5xx_i2s_set_tx_dai_fmt : fmt_5: tcr1 4400

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt 0

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt_1: rcr1 4400 rcr2 200

sport-i2s: bf5xx_i2s_set_rx_dai_fmt : fmt_5: rcr1 4400

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_2 0

bfin-wm8731: bf5xx_wm8731_hw_params clk 11289600 ret_3 0

sport-i2s: bf5xx_i2s_tx_hw_params : sport 0

sport-i2s: bf5xx_i2s_tx_hw_params : tcr2 0x200

sport-i2s: bf5xx_i2s_tx_hw_params : tcr2 0x20f

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

running in bf5xx_pcm_trigger

running in bf5xx_pcm_trigger shutdown sport tx stop

running in sport tx stop start

running in sport tx stop stop tx-run=0

pcm trigger 1111111111

tx handle callback finish

runnig in bf5xx_pcm_prepare

bf5xx-sport: sport_config_tx_dma buf:03f41000, fragcount:8, fragsize:0x1800

bf5xx-sport: sport_config_tx_dma x_count:0xc00, y_count:0x0

 

sport_config_tx_dma:dma free coherent

bf5xx-sport: setup_desc: setup desc: desc0=03f59000, next0=3f59012, desc1=03f59012,next1=3f59024

x_count=c00,y_count=0,addr=0x3f41000,cfs=0x7985

running in bf5xx_pcm_trigger

bf5xx-sport: sport_tx_start: tx_run:0, rx_run:0

running in sport_rx_dma_start dummy 1

running in sport_rx_dma_start

 

running in sport_tx_dma_start

bf5xx-sport: sport_tx_start: running here

running in bf5xx_pcm_trigger tx start

pcm trigger 1111111111

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

tx handle callback finish

bf5xx-sport: tx_handler enter

 

thanks!

Attachments

    Outcomes