2008-03-06 15:52:08 Problems with MMC and rc script
Miquel Soler i Mir (SPAIN)
Message: 52175 Hello I have some problem with MMC and start script from kernel
I'm using a MMC/RS of 125 MB with EXT3 filesystem.
I'm using this comands to format:
mke2fs -j -c /dev/mmc1
And this to mount and check
e2fsck -p /dev/mmc1
mount -t ext3 -o async /dev/mmc1 /mnt/mmc1
When I use this commands in a shell I don't have any problem.
But if I add this commands in rc file from start up script.
The system is usually working. But when the system was shutdown without umount the card sometimes the kernel can't check the card and I need to check manuality.
I don't know why using the same commands in the shell is working and not in rc file.
Can somebody help me.
Miquel Soler i Mir
2008-03-06 16:03:34 Re: Problems with MMC and rc script
Mike Frysinger (UNITED STATES)
Message: 52176 you need to qualify what you mean by "not working"
rc scripts cannot read from stdin, so you will need to make sure any commands you run is not interactive