2008-02-06 02:59:14     unknown error message after downloading to target

Document created by Aaronwu Employee on Aug 5, 2013
Version 1Show Document
  • View in full screen mode

2008-02-06 02:59:14     unknown error message after downloading to target

klaus hauer (AFGHANISTAN)

Message: 50725    hi,

 

I compiled successfully my kernel. Later I tried to download uImage via tftp and to start  with bootm. But I get the following error message.

 

 

 

ping failed; host 192.16

 

done.188

 

Bytes transferred = 4153304 (3f5fd8 hex)                                       

 

bf537> bootmf537> bootcm

 

## Booting image at 01000000 ...d 'bootcmd' - t                

 

   Image Name:   uClinux Kernel and ext2        

 

bf537> md.b 0x203F0000 6     

 

   Created:      2008-03-05  11:33:36 UTC3f0000: ff ff ff ff ff ff    ......   

 

   Image Type:   Blackfin Linux Kernel Image (gzip compressed)

 

bf537> mm.b 0537> tftp 0x10000000

 

   Data Size:    4153240 Bytes =  4 MBe ? e037 ETHERNET devic            

 

   Load Address: 0000100002: 9a ? 22             

 

   Entry Point:  00001000 08 ? FE.169.188; our IP

   Verifying Checksum ... OK  

 

00000004: 5b ? 4F.169.10

 

   Uncompressing Kernel Image ... OK59 ? 8400000006: 7

 

Starting Kernel at = 1000nux'.                   

 

Linux version 2.6.19.3-ADI-2007R1.1-svn (root@captainkir.O.Blackfin Linux support by http://blackfin.uclinux.org/ 

 

bf537> print#            

 

bootcmd=run ramboot

 

Processor Speed: 500 MHz core clock and 100 Mhz System Clock#####                 

 

loads_echo=1############ 

 

Board Memory: 64MB  

 

autoload=no###

 

Kernel Managed Memory: 64MB

 

rootpath=/romfs         

Memory map:=255.255.25

 

  text      = 0x00001000-0x00167c6cF537##############              

 

  init      = 0x00168000-0x00177434root=/dev/mtdblock0 rw          

 

  data      = 0x00179578-0x001b6e44sargs=setenv bootargs root=/dev/nfs

 

  stack     = 0x0017a000-0x0017c000                                 

 

Hardware Trace Enabled        

 

update=tftpb

 

Built 1 zonelsts.  Total pages: 1346220000000 0x2007FFFF;erase 0x2.........

 

Kernel command line: root=/dev/mtdblock0 rw                                        

 

Configuring Blackfin Priority Driven Interrupts000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(

 

PID hash table entries: 256 (order: 8, 1024 bytes)                                   

 

0000000  

 

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)         

 

stdout=serialoard00 ? E0                       

 

Inode-cache hash table entries: 4096 (order: 2                                          

 

Blackfin DATA_A SRAM: 16 KBC

 

serverip=192.168.169.188

 

Blackfin DATA_B SRAM: 16 KB              

 

*** ERRO

 

Blackfin Instruction SRAM: 48 KB            

 

Erasing Flash lo

 

Security Framework v1.0.0 initializediled; host 192.168.169.188 is not ali<

 

Capability LSM initialized                 

 

In:

 

Mount-cache hash table entries: 512  

 

bf537> set eth0 onors         

 

NET: Registered protocol family 16                  

 

Saving Envir

 

Blackfin GPIO Controller                      

 

Blackfin DMA Controller                

 

U

 

stamp_init(): registering device resources

 

bf537> icac          

 

Erasing Flash...

 

usbcore: regisered new interface driver usbfsasing Flash locations, Plea                  

 

usbcore: registered new interface driver usbfsasing Flash locations, Plea                  

 

bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 18) is a BFIN-UART

 

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

 

Blackfin mac net device registered

 

uclinux[mtd]: RAM probe address=0x3500000 size=0xa00000

 

Creating 1 MTD partitions on "RAM":

 

0x00000000-0x00a00000 : "ROMfs"

 

uclinux[mtd]: set ROMfs:EXT2  to be root filesystem

 

usbmon: debugfs is not available

 

net2272: 2272 not found!

 

 

NULL pointer access (probably)

 

 

CURRENT PROCESS:

 

COMM=swapper PID=1

 

return address: 0x000e0500; contents of [PC-16...PC+8]:

 

0062 6000 e628 <0>Kernel panic - not syncing:

 

 

WARNING : You should reconfigure the kernel to turn on

 

'Hardware error interrupt debugging'

 

The rest of this error is meanless

 

 

Whats wrong?

TranslateQuoteReplyEditDelete

 

 

2008-02-06 08:36:14     Re: unknown error message after downloading to target

Mike Frysinger (UNITED STATES)

Message: 50756    your paste is all garbled ... please edit your post and clean/fix it

QuoteReplyEditDelete

 

 

2008-02-06 09:58:50     Re: unknown error message after downloading to target

klaus hauer (AFGHANISTAN)

Message: 50761    I edited it

TranslateQuoteReplyEditDelete

 

 

2008-02-06 13:11:24     Re: unknown error message after downloading to target

Robin Getz (UNITED STATES)

Message: 50768    Klaus:

 

It still looks garbled to me...

 

the line:

 

>Configuring Blackfin Priority Driven Interrupts000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(

 

is 1/2 from U-Boot, and 1/2 from the kernel booting.

 

What terminal program are you using - and we can help capture a log that you can attach.

 

-Robin

QuoteReplyEditDelete

 

 

2008-02-07 06:02:20     Re: unknown error message after downloading to target

klaus hauer (AFGHANISTAN)

Message: 50802    ok I used another terminal program. I hope its clear now, Thanks for help.

 

 

 

 

 

TFTP from server 192.168.169.188; our IP address is 192.168.169.100

Filename 'vmImage'.

Load address: 0x1000000

Loading: #################################################################

                  #################################################################

         #################################################################

         ##

done

Bytes transferred = 1004512 (f53e0 hex)

bf537> bootm

## Booting image at 01000000 ...

   Image Name:   Linux-2.6.19.3-ADI-2007R1.1-svn

   Created:      2008-03-05  11:14:20 UTC

   Image Type:   Blackfin Linux Kernel Image (gzip compressed)

   Data Size:    1004448 Bytes = 980.9 kB

   Load Address: 00001000

   Entry Point:  00001000

   Verifying Checksum ... OK

   Uncompressing Kernel Image ... OK

Starting Kernel at = 1000

Linux version 2.6.19.3-ADI-2007R1.1-svn (root@captainkirk-desktop) (gcc-Version

4.1.1 (ADI 07R1)) #11 Wed Mar 5 12:14:16 CET 2008

Warning: limiting memory to 53MB due to hardware anomaly 05000263

Blackfin support (C) 2004-2007 Analog Devices, Inc.

Compiled for ADSP-BF537 Rev 0.2

Blackfin Linux support by http://blackfin.uclinux.org/

Processor Speed: 500 MHz core clock and 100 Mhz System Clock

Board Memory: 64MB

Kernel Managed Memory: 64MB

Memory map:

  text      = 0x00001000-0x00167c6c

  init      = 0x00168000-0x00177434

  data      = 0x00179578-0x001b6e44

  stack     = 0x0017a000-0x0017c000

  bss       = 0x001b6e50-0x001c5650

  available = 0x001c5650-0x03500000

  rootfs    = 0x03500000-0x03f00000

  DMA Zone  = 0x03f00000-0x04000000

Instruction Cache Enabled

Data Cache Enabled (write-through)

Hardware Trace Enabled

Built 1 zonelists.  Total pages: 13462

Kernel command line: root=/dev/mtdblock0 rw

Configuring Blackfin Priority Driven Interrupts

PID hash table entries: 256 (order: 8, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Physical pages: 3500

Memory available: 51840k/64026k RAM, (61k init code, 1435k kernel code, 58k data

, 1024k dma)

Blackfin Scratchpad data SRAM: 4 KB

Blackfin DATA_A SRAM: 16 KB

Blackfin DATA_B SRAM: 16 KB

Blackfin Instruction SRAM: 48 KB

Security Framework v1.0.0 initialized

Capability LSM initialized

Mount-cache hash table entries: 512

NET: Registered protocol family 16

Blackfin GPIO Controller

Blackfin DMA Controller

stamp_init(): registering device resources

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

NET: Registered protocol family 2

IP route cache hash table entries: 512 (order: -1, 2048 bytes)

TCP established hash table entries: 2048 (order: 1, 8192 bytes)

TCP bind hash table entries: 1024 (order: 0, 4096 bytes)

TCP: Hash tables configured (established 2048 bind 1024)

TCP reno registered

JFS: nTxBlock = 405, nTxLock = 3242

io scheduler noop registered

io scheduler anticipatory registered (default)

io scheduler cfq registered

Dynamic Power Management Controller Driver v0.1: major=10, minor = 254

Serial: Blackfin serial driver

bfin-uart.1: ttyBF0 at MMIO 0xffc00400 (irq = 18) is a BFIN-UART

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

Blackfin mac net device registered

uclinux[mtd]: RAM probe address=0x3500000 size=0xa00000

Creating 1 MTD partitions on "RAM":

0x00000000-0x00a00000 : "ROMfs"

uclinux[mtd]: set ROMfs:EXT2  to be root filesystem

usbmon: debugfs is not available

net2272: 2272 not found!

 

 

NULL pointer access (probably)

 

CURRENT PROCESS:

 

COMM=swapper PID=1

return address: 0x000e0500; contents of [PC-16...PC+8]:

0062 6000 e628 <0>Kernel panic - not syncing:

 

WARNING : You should reconfigure the kernel to turn on

'Hardware error interrupt debugging'

The rest of this error is meanless

TranslateQuoteReplyEditDelete

 

 

2008-02-11 17:36:19     Re: unknown error message after downloading to target

Mike Frysinger (UNITED STATES)

Message: 50913    disable the usb drivers and try to boot it

Attachments

    Outcomes