ADAS1000 Drivers and Blackfin Framework

Document created by CatherineR Employee on Oct 12, 2012Last modified by CatherineR Employee on Oct 12, 2012
Version 2Show Document
  • View in full screen mode

Q: I want to use your ADAS1000 in my ECG application and I need software drivers/starting point/sample code for interfacing to my ucontroller/DSP/ linux environment

 

A: On our WIKI webpage, we have 3 sets of drivers/frameworks to get you started with coding for the ADAS1000

 

ADAS1000 Microcontroller NO-OS Driver

The goal of this project (Microcontroller No-OS) is to be able to provide reference projects for lower end processors, which can't run Linux, or aren't running a specific operating system, to help those customers using microcontrollers with ADI parts. Here you can find a generic driver for the ADAS1000 which can be used as a base for any microcontroller platform and also specific drivers for Renesas platforms.

http://wiki.analog.com/resources/tools-software/uc-drivers/renesas/adas1000

spi_architecture.png

 

ADAS1000 and Linux Driver

Also available on our WIKI page is a linux driver for the ADAS1000.

http://wiki.analog.com/resources/tools-software/linux-drivers/iio-adc/adas1000

 

ADAS1000 and BF-527 Visual DSP framework

Visual DSP based code framework has been developed and is now available at the following WIKI location:

http://wiki.analog.com/resources/tools-software/bfin/adas1000

This code interfaces between the ADAS1000 and the ADSP-BF527 low power Blackfin Processor utilizing the SDP (System Demonstration Platform) with the ADAS1000 evaluation board.

10810-002.jpg

1 person found this helpful

Attachments

    Outcomes