FAQ: Can MEMS mics be soldered to a flex PCB?

Document created by JeradL on May 21, 2012
Version 1Show Document
  • View in full screen mode

Yes, a flex PCB can be used with MEMS microphones. All of our microphones are actually available on flex PCB evaluation boards so that they can be easily placed in your own system for testing. Handling considerations in the datasheets and application note AN-1068 should be followed during assembly.

 

This FAQ was generated from the following discussion: Can MEMS mics be soldered to a flex PCB?

Attachments

    Outcomes