EVAL-ADAU1781Z GPIO Mapping in SigmaStudio

Document created by BrettG on Nov 28, 2011Last modified by BrettG on Nov 28, 2011
Version 2Show Document
  • View in full screen mode

The GPIO pin mapping scheme in SigmaStudio is not intuitive because of the way SigmaStudio auto-numbers the GPIO inputs and outputs in the schematic view. In order to clear up confusion, here is a mapping table and example project that shows how the GPIO interface hardware on the board maps to the ADAU1781's hardware pins, register settings, and SigmaStudio schematic I/O cells.

 

ScreenHunter_03 Nov. 28 10.22.jpg

 

 

ScreenHunter_02 Nov. 28 10.20.jpg

 

ScreenHunter_01 Nov. 28 10.20.jpg

 

ScreenHunter_04 Nov. 28 10.30.jpg

 

This FAQ was generated from the following discussion: EVAL-ADAU1781Z GPIO Mapping in SigmaStudio

Outcomes