ADAU1701 Input and Output Signal Routing

Document created by BrettG Employee on Oct 31, 2011
Version 1Show Document
  • View in full screen mode

How are the ADAU1701 inputs and outputs routed in SigmaStudio?

 

You can use the on-board DACs and serial ports at the same time. You just have to route signals to them in the DSP program. Here's a graphic showing how each analog and digital data channel is assigned in SigmaStudio.

ScreenHunter_01 Oct. 31 13.01.jpg

 

An example project is attached for reference.

 

This FAQ was generated from the following discussion: ADAU1701 - on-chip and External DAC problem

Outcomes