Advantiv™ EVAL-ADV7619-7511 Video Evaluation Board

    This FAQ applies to EVAL-ADV7619-7511 and EVAL-ADV7619-7511P. All support  files in their latest versions will be attached below.


    Below are the support files for these evaluation boards. If you use these files, we recommend that you subscribe to EMail notifications for  either the entire forum or at least this FAQ by clicking on the menu to the  right.  In this way you will be automatically notified if there are any  comments or changes to this FAQ or attached documents.  If the menu choice is  "Stop email notifications," then you are already subscribed.



    EVAL-ADV7619-7511_rev1p1.pdfSchematics (PDF) for EVAL-ADV7619-7511/EVAL-ADV7619-7511P
    EVAL-ADV7619-7511_build_files.zipThis zip contains ORCAD schematic, Allegro board files, gerbers, and BOMs for the evaluation boards
    EVAL-ADV7619-7511_BOM_20151211.pdfBOM (in PDF format) for the EVAL-ADV7619-7511 evaluation board
    EVAL-ADV7619-7511P_BOM_20151211.pdfBOM (in PDF format) for the EVAL-ADV7619-7511P evaluation board
    UG-338User Guide for this evaluation board
    AVESThis is a legacy link to the previous AVES software.  For new installations please use AVES3
    AVES3Link to AVES3 installer.  Used in conjunction with
    AVES_Folder-EVAL-ADV7619-7511.zipFolder of files to be used by AVES3
    AdvantivVideo.zipUSB Driver for Advantiv™ Video Evaluation Boards
    VDSP_BF524_M25P80_flash_programmer.dxeVisualDSP 5.1.1 flash programmer driver file for EVAL-ADV7619-7511 and EVAL-ADV7619-7511-P
    EVAL-ADV7619-7511_v1p61_boot_image.hexComplete firmware image for EVAL-ADV7619-7511 including u-boot bootloader and v1p61 application binary. In order to program this on the board you will need at least ADZS-ICE-1000 and the test drive version of VisualDSP++ or CCES. Note this loader file is in Intel hex format.

    Application binary v1p61 for EVAL-ADV7619-7511. If your board has a functional u-boot bootloader, you can program this on the board via RS232 following the instructions in the user guide UG-295.

    Note: This loader file is in binary format in order to be compatible with u-boot.