FAQ: What is the Channel To Channel Isolation of the ADRF6520. 

Document created by jdobler Employee on Jun 1, 2018
Version 1Show Document
  • View in full screen mode

The Channel to Channel Isolation varies over frequency, gain, and filter corner. 


Attached are measurements done on a typical part for 3 different filter corners (144, 720 MHz and Bypass Mode ) and 3 different gain settings (0, 30, 54 dB) while keeping the output at 0 dBm.


Measurements that were taken were Channel 1 Input to Channel 2 Output, Channel 2 Input to Channel 1 Output, and Channel 1 Output to Channel 2 Output.  Signal path pins that were not driven were terminated in 50 Ohms.

1 person found this helpful