FAQ: Flash read/prgm via JTAG

Document created by Kader.M Employee on Mar 27, 2018
Version 1Show Document
  • View in full screen mode

Question:

I have a board containing a ADSP-21161 SHARC

On the board are >  Flash mem for the SHARC FW as well as SDRAM

The board contains a legacy JTAG (2x7 pin) interface.

I wish to read the FW on the flash via the JTAG interface

Which equipment and Software do I require to do this?

=================================

 

Answer:

 

You can refer the below EE note and the associated codes:
http://www.analog.com/media/en/technical-documentation/application-notes/EE355.pdf
http://www.analog.com/media/en/technical-documentation/application-notes/EE355v01.zip

 

You can use our emulators ICE-1000/ICE-2000.

 

Please refer the below FAQ about ICE-1000/ICE-2000
https://ez.analog.com/docs/DOC-11221

 

Please find the product page of ICE-1000/ICE-2000 http://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/emulators.html#eb-overview

Attachments

    Outcomes