Updating ICE-1000/2000 firmware with OpenOCD

Document created by chadw Employee on May 11, 2017
Version 1Show Document
  • View in full screen mode

In order to update the firmware for the Analog Devices Inc. ICE-1000 and/or ICE-2000 emulator using OpenOCD, the following process should be followed:

  1. Download the latest firmware files.
  2. Unzip the firmware files
  3. Use the openOCD firmware command to perform the update
    1. openocd -f interface/ice1000.cfg -c "firmware Ice1000_firmware.hex"

NOTE: Only the version of openOCD from a CrossCore Embedded Studio release can be used.

1 person found this helpful

Attachments

    Outcomes