Lost License info of existing MIDAS Programming Adapter for ADUC7026

Document created by analog-archivist Employee on Feb 23, 2016
Version 1Show Document
  • View in full screen mode

We have a midas jlINK PROGRAMMER ADAPTER together with a ADUC7026QSZ Demo Kit
in routine use. Today, we lost the license key number of our ADuC 7024 EVAL QSZ
package and urgently need new one to continue R&D Work. This happened during a
Clean-UP of our PCs and we have lost the original label of the serial number.
WE lost the license key information in our PC, due to cleanup procedure on this
PC. From this adapter, we used to program routinely the AD 7026 units from this
on quantities of 200 per year, into our own target board, for our electronic
load products.

Details :
We use the uVision KEIL3 V.3.22 Development Environment compiler.
The RDI license manager tells us a serial number : 70000527
We use the mIDASLink RDI.dll is V.2.68g JLinkARM.dll is V.268f
On the adapter hardware housing itself we see labelled : Date : 05/01/24  Batch
Number 2200000

Please provide us with a valid license key / number to be able use this adapter
again !

 

The software and drivers are all very old – we don’t have these. I also expect
the JLINK is an old version.

It would be best to just give you a new EVAL-ADuC7026QSPZ kit - if Product Line
approves it. Otherwise you can order it here :
http://www.analog.com/en/processors-dsp/analog-microcontrollers/aduc7026/product
s/product.html

Attachments

    Outcomes