ADT7320, ADT7420 - Requirements to setup the ADT7320/ADT7420

Document created by analog-archivist Employee on Feb 23, 2016
Version 1Show Document
  • View in full screen mode

What additional components do I require to setup the ADT7320/ADT7420?

 

Both parts require a 0.1uf ceramic and 10uf tantalum decoupling capacitors. The
interrupt and critical limit pins will also require 10kΩ pull-up resistors. The
ADT7420 will also require pull-up resistors on the SDA and SDL line of the I²C
bus.

Attachments

    Outcomes