ADF4360-5: Reference I/P signal

Document created by analog-archivist Employee on Feb 23, 2016
Version 1Show Document
  • View in full screen mode

We are driving the reference input of the device with a AD8170.
The output of the AD8170 is a 66MHz square wave with a slew rate of 600V/uSec,
Is this signal applicable with the ADF4360-5 device?


The REFIN input is a CMOS logic input, so therefore, you can either AC couple a
min signal level of 0.7volts or DC couple a TTL/CMOS square wave input signal.
In your case, you could AC couple your input signal.