What's the best way to connect a 3.3V CMOS clock signal to SYSCLK?

Document created by analog-archivist Employee on Feb 23, 2016
Version 1Show Document
  • View in full screen mode

Concerning the SYSCLK input, I have a single-ended clock signal in CMOS 3.3V
format and I'd like to know what's the best way to connect this clock to the
SYSCLK inputs?


SYSCLK accepts 1.8V CMOS single-ended. However, you can setup the 3.3V CMOS
clock as per Figure 34 in the AD9957 datasheet: