Output Impedance state when Powered Down

Document created by analog-archivist Employee on Feb 23, 2016
Version 1Show Document
  • View in full screen mode

Is the AD8019 output high impedance when in power down mode?


No. ~30 ohms at 100kHz and 125 ohms at 1MHz

The power down feature on the AD8019 is designed only to power down the part.
It reduces quiescent current, removes bias levels from all or part of the
circuit. It does not set the output of the opamp into a high impedance mode.
The input impedance of the AD8019 will be a non-linear function of the voltage