FAQ: I have a Blackfin based USB application for which I've enabled (unmasked) the Connect and Disconnect interrupts, however, when I plug and unplug the USB cable no interrupt is generated. Why is this?

Document created by matchaze Employee on Jan 19, 2010Last modified by AndyR on May 19, 2011
Version 2Show Document
  • View in full screen mode

The USB Connect (CONN_B) and Disconnect (DISCON_BE) interrupts are valid only in host mode, i.e., when the Blackfin USB controller is acting as a host.  These interrupts serve to indicate to the Blackfin USB controller that an external USB device has been connected and/or disconnected.  In device mode these interrupts will not be asserted.

Attachments

    Outcomes